monacor-Lautsprecher

Tweeter
	DT-25N order no. mo-104010 EUR 24,85 25 mm dome tweeter with silk dome. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 40/80 W frequency range = 2000-20000 Hz resonance frequency fs = 1600 Hz impedance R = 8 Ohm sound pressure level SPL = 95 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 46 mm overall diameter d = 66 mm mounting depth (not countersunk) t = 21 mm mass m = 0,07 kg
	DT-284 (Paar) order no. mo-131410 EUR 67,90 28 mm dome tweeter with high quality dome. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 60/100 W frequency range = 2000-20000 Hz resonance frequency fs = 1300 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) voice coil diameter = 28 mm mounting diameter d = 46 mm overall diameter d = 60 mm mounting depth (not countersunk) t = 21,7 mm mass m = 0,17 kg
	DT-25TB order no. mo-100610 EUR 36,50 25 mm dome tweeter with ceramic dome. power handling (continuous/programme) = 40/80 W frequency range = 2000-25000 Hz resonance frequency fs = 750 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 47 mm overall diameter d = 65,8 mm mounting depth (not countersunk) t = 53 mm mass m = 0,08 kg PDF data sheet
	DT-25TI order no. mo-102660 EUR 50,90 25 mm dome tweeter with titanium dome. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 50/100 W frequency range = 2500-22000 Hz resonance frequency fs = 1800 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 48 mm overall diameter d = 66 mm mounting depth (not countersunk) t = 18 mm mass m = 0,068 kg
	DT-28N order no. mo-104020 EUR 26,85 28 mm dome tweeter with silk dome. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 50/100 W frequency range = 1600-20000 Hz resonance frequency fs = 1200 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) voice coil diameter = 28 mm mounting diameter d = 46 mm overall diameter d = 55 mm mounting depth (not countersunk) t = 20 mm mass m = 0,07 kg
	DT-80 order no. mo-103870 EUR 23,45 25 mm tweeter with silk cone. power handling (continuous/programme) = 45/90 W frequency range = 2000-16000 Hz resonance frequency fs = 1600 Hz impedance R = 8 Ohm sound pressure level SPL = 97 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 55 mm overall diameter d = 90 mm mounting depth (not countersunk) t = 37 mm mass m = 0,12 kg
	DT-100 order no. mo-100040 EUR 28,85 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 30/60 W frequency range = 2000-20000 Hz resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 72 mm overall diameter d = 80 x 116 mm mounting depth (not countersunk) t = 26 mm mass m = 0,58 kg
	DT-107 order no. mo-102640 EUR 26,85 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 80/130 W frequency range = 2000-22000 Hz resonance frequency fs = 1200 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 71 mm overall diameter d = 96,5 mm mounting depth (not countersunk) t = 23 mm mass m = 0,03 kg
	DT-250 order no. mo-100090 EUR 49,00 25 mm dome tweeter with titanium dome. power handling (continuous/programme) = 50/100 W frequency range = 2000-25000 Hz resonance frequency fs = 1700 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 74 mm overall diameter d = 86 x 116 mm mounting depth (not countersunk) t = 26 mm mass m = 0,55 kg
	DT-250TB order no. mo-100620 EUR 85,00 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 40/100 W frequency range = 550-20000 Hz resonance frequency fs = 550 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 47 mm overall diameter d = 65,8 mm mounting depth (not countersunk) t = 53 mm mass m = 0,54 kg
	DT-99 order no. mo-103880 EUR 17,40 25 mm dome tweeter with silk dome. power handling (continuous/programme) = 40/80 W frequency range = 1500-18000 Hz resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 70 mm overall diameter d = 99,5 mm mounting depth (not countersunk) t = 35 mm mass m = 0,52 kg
	DT-101SK order no. mo-100060 EUR 23,85 25,4 mm dome tweeter with silk dome. power handling (continuous/programme) = 30/50 W frequency range = 2000-22000 Hz resonance frequency fs = 900 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25,4 mm mounting diameter d = 80 mm overall diameter d = 100 mm mounting depth (not countersunk) t = 46 mm mass m = 0,05 kg
	DT-104/4 order no. mo-104650 - not available 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 45/100 W frequency range = 2000-19000 Hz resonance frequency fs = 1200 Hz impedance R = 4 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 81 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 32 mm mass m = 0,58 kg
	DT-104/8 order no. mo-104660 - not available 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 45/100 W frequency range = 2000-19000 Hz resonance frequency fs = 1200 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 81 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 32 mm mass m = 0,58 kg
	DT-105 order no. mo-100050 EUR 21,45 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 30/50 W frequency range = 2000-20000 Hz resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 80 mm overall diameter d = 100 mm mounting depth (not countersunk) t = 30 mm mass m = 0,05 kg
	DT-109 order no. mo-103840 EUR 25,85 25 mm dome tweeter with silk dome. power handling (continuous/programme) = 40/80 W frequency range = 2000-22000 Hz resonance frequency fs = 1200 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 70 mm overall diameter d = 100 mm mounting depth (not countersunk) t = 40 mm mass m = 0,61 kg
	DT-252 order no. mo-102290 EUR 42,45 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 75/150 W frequency range = 2500-22000 Hz resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 75 mm overall diameter d = 110 x 84 mm mounting depth (not countersunk) t = 28 mm mass m = 0,53 kg
	RBT-95 order no. mo-102250 EUR 26,85 ribbon tweeter. power handling (continuous/programme) = 30/60 W frequency range = 4000-22000 Hz resonance frequency fs = 4500 Hz impedance R = 8 Ohm sound pressure level SPL = 98 dB (2,83V; 1m) voice coil diameter = - mm mounting diameter d = 80 mm overall diameter d = 95 mm mounting depth (not countersunk) t = 17 mm mass m = 0,12 kg
	RBT-95 SQ order no. mo-105120 EUR 26,85 ribbon tweeter. power handling (continuous/programme) = 30/60 W frequency range = 5000-22000 Hz resonance frequency fs = 4500 Hz impedance R = 8 Ohm sound pressure level SPL = 98 dB (2,83V; 1m) voice coil diameter = - mm mounting diameter d = 80 mm overall diameter d = 95 mm mounting depth (not countersunk) t = 17 mm mass m = 0,13 kg
	DT-254 order no. mo-102780 EUR 36,45 25 mm dome tweeter with fabric dome. power handling (continuous/programme) = 90/150 W frequency range = 1500-22000 Hz resonance frequency fs = 900 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 25 mm mounting diameter d = 72 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 38 mm
	DT-300 order no. mo-103860 EUR 27,85 30 mm dome tweeter with silk dome. power handling (continuous/programme) = 50/100 W frequency range = 2000-19000 Hz resonance frequency fs = 750 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) voice coil diameter = 30 mm mounting diameter d = 89 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 53 mm
	DT-280 order no. mo-103850 EUR 23,45 28 mm dome tweeter with silk dome. power handling (continuous/programme) = 50/100 W frequency range = 2000-22000 Hz resonance frequency fs = 1100 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) voice coil diameter = 28 mm mounting diameter d = 86 mm overall diameter d = 130 mm mounting depth (not countersunk) t = 33 mm mass m = 0,75 kg
	RBT-1516TB (Paar) order no. mo-105140 EUR 327,00 ribbon tweeter. power handling (continuous/programme) = 40/80 W frequency range = 3500-25000 Hz impedance R = 8 Ohm sound pressure level SPL = 97 dB (2,83V; 1m) mounting diameter d = 48 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 113 mm mass m = 1,5 kg PDF data sheet
Horn
	WG-300 order no. mo-110110 EUR 8,79
Mids
recommended cabinet 1: closed cabinet with 0,99 L volume from 137/87 Hz (-3dB/-8dB) recommended cabinet 2: 4 L volume bass reflex cabinet with HP35 reflex tube, 11 cm long. from 64/54 Hz (-3dB/-8dB).	SPH-75/4 order no. mo-102760 - not available 7 cm midrange driver with polypropylene cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 15/30 W frequency range = 100-16000 Hz resonance frequency fs = 85 Hz impedance R = 4 Ohm sound pressure level SPL = 83 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 2,9 N/A voice coil inductance L = 0,1 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 2,7 g equivalent volume of compliance Vas = 1,9 l total Q factor Qts = 0,48 (Qms=3,15, Qes=0,57) voice coil diameter = 20,5 mm mounting diameter d = 72 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 42 mm mass m = 0,4 kg
recommended cabinet 1: closed cabinet with 1,5 L volume from 123/78 Hz (-3dB/-8dB) recommended cabinet 2: 5,8 L volume bass reflex cabinet with HP35 reflex tube, 9 cm long. from 55/48 Hz (-3dB/-8dB).	SPH-75/8 order no. mo-102770 EUR 15,40 7 cm midrange driver with polypropylene cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 15/30 W frequency range = 100-16000 Hz resonance frequency fs = 85 Hz impedance R = 8 Ohm sound pressure level SPL = 83 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,15 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 2,7 g equivalent volume of compliance Vas = 1,9 l total Q factor Qts = 0,56 (Qms=3,9, Qes=0,65) voice coil diameter = 20,5 mm mounting diameter d = 72 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 42 mm mass m = 0,4 kg
	SPW-100/8 order no. mo-104730 - not available 9 cm bass-midrange driver with high quality cone. power handling (continuous/programme) = 25/50 W frequency range = 3-18000 Hz resonance frequency fs = 70 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) equivalent volume of compliance Vas = 5 l total Q factor Qts = 0,49 (Qms=$qms, Qes=$qes) mounting diameter d = 89 mm overall diameter d = 100,5 mm mounting depth (not countersunk) t = 53 mm
recommended cabinet 1: closed cabinet with 0,81 L volume from 184/116 Hz (-3dB/-8dB) recommended cabinet 2: 3,2 L volume bass reflex cabinet with HP35 reflex tube, 7 cm long. from 87/72 Hz (-3dB/-8dB).	MS-100CHQ order no. mo-131490 EUR 98,00 9 cm midrange driver with high quality cone. power handling (continuous/programme) = 60/150 W frequency range = 200-5000 Hz resonance frequency fs = 105 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,4 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,7 g equivalent volume of compliance Vas = 2 l total Q factor Qts = 0,44 (Qms=2,22, Qes=0,55) voice coil diameter = 25 mm mounting diameter d = 90 mm overall diameter d = 100 mm mounting depth (not countersunk) t = 58 mm mass m = 0,8 kg
recommended cabinet 1: closed cabinet with 1,1 L volume from 132/83 Hz (-3dB/-8dB) recommended cabinet 2: 3,7 L volume bass reflex cabinet with HP35 reflex tube, 13 cm long. from 68/54 Hz (-3dB/-8dB).	SP-100/8 order no. mo-103780 EUR 20,85 10 cm midrange driver with paper cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = 100-7000 Hz resonance frequency fs = 61 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 5,55 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 52 cm² effective mechanical mass incl. air load 5,5 g equivalent volume of compliance Vas = 4,7 l total Q factor Qts = 0,37 (Qms=2,28, Qes=0,44) voice coil diameter = 25 mm mounting diameter d = 103 mm overall diameter d = 106 mm mounting depth (not countersunk) t = 63 mm mass m = 0,8 kg
recommended cabinet 1: closed cabinet with 2,1 L volume from 92/58 Hz (-3dB/-8dB) recommended cabinet 2: 8,4 L volume bass reflex cabinet with HP35 reflex tube, 12 cm long. from 44/36 Hz (-3dB/-8dB).	SPH-100C order no. mo-102300 EUR 48,85 10 cm midrange driver with carbon cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/50 W frequency range = 3-6000 Hz resonance frequency fs = 50 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 5,1 N/A voice coil inductance L = 0,65 mH effective piston radiating area Sd = 54 cm² effective mechanical mass incl. air load 7 g equivalent volume of compliance Vas = 6 l total Q factor Qts = 0,44 (Qms=3,53, Qes=0,5) voice coil diameter = 25,5 mm mounting diameter d = 98 mm overall diameter d = 106 mm mounting depth (not countersunk) t = 50 mm mass m = 0,85 kg
recommended cabinet 1: closed cabinet with 2,1 L volume from 109/69 Hz (-3dB/-8dB) recommended cabinet 2: 7,6 L volume bass reflex cabinet with HP35 reflex tube, 9 cm long. from 55/44 Hz (-3dB/-8dB).	SPP-110/4 order no. mo-101050 EUR 24,90 10 cm midrange driver with synthetics ABS cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = 30-8000 Hz resonance frequency fs = 53 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 3,3 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,3 g equivalent volume of compliance Vas = 8 l total Q factor Qts = 0,37 (Qms=2,01, Qes=0,46) voice coil diameter = 25,5 mm mounting diameter d = 100 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 60 mm mass m = 0,9 kg
recommended cabinet 1: closed cabinet with 1,9 L volume from 116/73 Hz (-3dB/-8dB) recommended cabinet 2: 7 L volume bass reflex cabinet with HP50 reflex tube, 19 cm long. from 59/47 Hz (-3dB/-8dB).	SPP-110/8 order no. mo-101060 EUR 24,90 10 cm midrange driver with synthetics ABS cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = 30-8000 Hz resonance frequency fs = 55 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 4,6 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,4 g equivalent volume of compliance Vas = 8 l total Q factor Qts = 0,37 (Qms=2,01, Qes=0,46) voice coil diameter = 25,5 mm mounting diameter d = 100 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 60 mm mass m = 0,9 kg
recommended cabinet 1: closed cabinet with 2,7 L volume from 117/74 Hz (-3dB/-8dB) recommended cabinet 2: 10,9 L volume bass reflex cabinet with HP50 reflex tube, 10 cm long. from 53/46 Hz (-3dB/-8dB).	SPP-110/8S order no. mo-103330 EUR 21,90 10 cm midrange driver with synthetics ABS cone. To avoid compression effects the driver possesses a pole piece hole. The driver is magnetically shielded. power handling (continuous/programme) = 30/60 W frequency range = 30-12000 Hz resonance frequency fs = 78 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 4,27 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 3,9 g equivalent volume of compliance Vas = 4 l total Q factor Qts = 0,53 (Qms=2,1, Qes=0,71) voice coil diameter = 25 mm mounting diameter d = 102 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 70 mm mass m = 0,875 kg
	SPH-4TB order no. mo-105150 EUR 27,00 10 cm bass-midrange driver with high quality cone. The spider is rear ventilated for better cooling. The driver is magnetically shielded. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 35/70 W frequency range = 3-2500 Hz resonance frequency fs = 59 Hz impedance R = 4 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm force factor BL = 5,73 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 52 cm² effective mechanical mass incl. air load 9 g equivalent volume of compliance Vas = 3 l total Q factor Qts = 0,36 (Qms=3,95, Qes=0,4) voice coil diameter = 25 mm mounting diameter d = 92 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 76,5 mm mass m = 1,3 kg PDF data sheet
recommended cabinet 1: closed cabinet with 1,9 L volume from 145/91 Hz (-3dB/-8dB) recommended cabinet 2: 7,7 L volume bass reflex cabinet with HP50 reflex tube, 9 cm long. from 66/57 Hz (-3dB/-8dB).	SPH-102KEP order no. mo-102590 EUR 55,90 10 cm midrange driver with kevlar cone. The cone is equipped with a phase plug. power handling (continuous/programme) = 40/120 W frequency range = 100-10000 Hz resonance frequency fs = 95 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 4,75 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 3 g equivalent volume of compliance Vas = 3 l total Q factor Qts = 0,52 (Qms=5,7, Qes=0,57) voice coil diameter = 25,5 mm mounting diameter d = 95 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 76 mm mass m = 0,97 kg
	SPW-116/8 order no. mo-104750 EUR 19,90 10 cm bass-midrange driver with high quality cone. power handling (continuous/programme) = 40/80 W frequency range = 30-18000 Hz resonance frequency fs = 63 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) equivalent volume of compliance Vas = 6 l total Q factor Qts = 0,42 (Qms=$qms, Qes=$qes) mounting diameter d = 92 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 53 mm
recommended cabinet 1: closed cabinet with 1,3 L volume from 159/100 Hz (-3dB/-8dB) recommended cabinet 2: 5,2 L volume bass reflex cabinet with HP50 reflex tube, 12 cm long. from 77/63 Hz (-3dB/-8dB).	MSH-115 order no. mo-101840 EUR 37,85 11 cm midrange driver with high quality cone. power handling (continuous/programme) = 50/120 W frequency range = 100-10000 Hz resonance frequency fs = 85 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,3 Ohm force factor BL = 4,8 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,5 g equivalent volume of compliance Vas = 4 l total Q factor Qts = 0,43 (Qms=1,98, Qes=0,55) voice coil diameter = 25 mm mounting diameter d = 101 mm overall diameter d = 115 mm mounting depth (not countersunk) t = 55 mm mass m = 0,6 kg
recommended cabinet 1: closed cabinet with 0,79 L volume from 186/118 Hz (-3dB/-8dB) recommended cabinet 2: 3 L volume bass reflex cabinet with HP35 reflex tube, 7 cm long. from 92/74 Hz (-3dB/-8dB).	MSH-116/4 order no. mo-102150 EUR 40,45 11 cm midrange driver with high quality cone . power handling (continuous/programme) = 40/120 W frequency range = 120-10000 Hz resonance frequency fs = 95 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,3 N/A voice coil inductance L = 0,18 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,6 g equivalent volume of compliance Vas = 2,7 l total Q factor Qts = 0,4 (Qms=2,38, Qes=0,48) voice coil diameter = 25 mm mounting diameter d = 101 mm overall diameter d = 124 mm mounting depth (not countersunk) t = 55 mm mass m = 0,6 kg
recommended cabinet 1: closed cabinet with 2,5 L volume from 116/73 Hz (-3dB/-8dB) recommended cabinet 2: 9,8 L volume bass reflex cabinet with HP50 reflex tube, 12 cm long. from 52/45 Hz (-3dB/-8dB).	SPH-100AL order no. mo-103810 EUR 48,85 11 cm midrange driver with aluminium cone. power handling (continuous/programme) = 40/120 W frequency range = 100-5000 Hz resonance frequency fs = 80 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 4,81 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4,9 g equivalent volume of compliance Vas = 3,2 l total Q factor Qts = 0,55 (Qms=3,05, Qes=0,67) voice coil diameter = 25 mm mounting diameter d = 90 mm overall diameter d = 124,3 mm mounting depth (not countersunk) t = 55 mm
	DM-135 order no. mo-101320 - not available 12 cm midrange driver with high quality cone. power handling (continuous/programme) = 30/60 W frequency range = 650-5000 Hz resonance frequency fs = 450 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,6 Ohm voice coil inductance L = 0,2 mH effective mechanical mass incl. air load 3 g total Q factor Qts = 0,76 (Qms=6,48, Qes=0,86) voice coil diameter = 48,5 mm mounting diameter d = 100 mm overall diameter d = 134 mm mounting depth (not countersunk) t = 45 mm mass m = 1 kg
	MS-125 order no. mo-100250 EUR 21,45 12 cm midrange driver with high quality cone. power handling (continuous/programme) = 30/60 W frequency range = 600-7000 Hz resonance frequency fs = 550 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 108 mm overall diameter d = 130 mm mounting depth (not countersunk) t = 60 mm mass m = 0,75 kg
	MS-130 order no. mo-101400 EUR 29,85 13 cm midrange driver with high quality cone. The ribber surround is invers. power handling (continuous/programme) = 40/250 W frequency range = 400-8000 Hz resonance frequency fs = 120 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 4,2 N/A voice coil inductance L = 0,25 mH effective piston radiating area Sd = 70 cm² effective mechanical mass incl. air load 4 g equivalent volume of compliance Vas = 3 l total Q factor Qts = 0,88 (Qms=5,23, Qes=1,06) voice coil diameter = 25,5 mm mounting diameter d = 120 mm overall diameter d = 135 mm mounting depth (not countersunk) t = 70 mm mass m = 1,3 kg
	MS-150 order no. mo-104680 EUR 30,90 13 cm midrange driver with cellulose cone. power handling (continuous/programme) = 50/150 W frequency range = 400-4500 Hz resonance frequency fs = 240 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm voice coil inductance L = 0,18 mH effective piston radiating area Sd = 85 cm² total Q factor Qts = 1,09 (Qms=2,22, Qes=2,13) voice coil diameter = 25 mm mounting diameter d = 114 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 138 mm
	DM-75TB order no. mo-105130 EUR 124,00 13 cm midrange driver with fabric cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 100/200 W frequency range = 260-7000 Hz resonance frequency fs = 260 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm voice coil inductance L = 0,01 mH effective piston radiating area Sd = 44 cm² total Q factor Qts = 0,4 (Qms=0,78, Qes=0,81) voice coil diameter = 75 mm mounting diameter d = 117 mm overall diameter d = 140 mm mounting depth (not countersunk) t = 81 mm mass m = 1,15 kg PDF data sheet
	SPH-5TB order no. mo-105160 EUR 42,50 14 cm bass-midrange driver with high quality cone. The driver is magnetically shielded. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 40/80 W frequency range = 3-3000 Hz resonance frequency fs = 52 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 13,9 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 95 cm² effective mechanical mass incl. air load 14 g equivalent volume of compliance Vas = 8 l total Q factor Qts = 0,64 (Qms=3,37, Qes=0,79) voice coil diameter = 25 mm mounting diameter d = 122 mm overall diameter d = 156 mm mounting depth (not countersunk) t = 89 mm mass m = 1,7 kg PDF data sheet
	SPH-6TB order no. mo-105170 EUR 127,00 16 cm bass-midrange driver with polypropylene cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 80/160 W frequency range = 3-3000 Hz resonance frequency fs = 46 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6,7 Ohm force factor BL = 13,4 N/A voice coil inductance L = 1,2 mH effective piston radiating area Sd = 133 cm² effective mechanical mass incl. air load 24 g equivalent volume of compliance Vas = 12 l total Q factor Qts = 0,25 (Qms=5,59, Qes=0,26) voice coil diameter = 75 mm mounting diameter d = 148 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 88 mm mass m = 2,3 kg PDF data sheet
Coaxial speaker
recommended cabinet 1: closed cabinet with 1,9 L volume from 131/82 Hz (-3dB/-8dB) recommended cabinet 2: 7 L volume bass reflex cabinet with HP50 reflex tube, 14 cm long. from 65/52 Hz (-3dB/-8dB).	SPX-5/2TB order no. mo-105250 EUR 119,00 14 cm coax driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. power handling (continuous/programme) = 50/100 W frequency range = 3-20000 Hz resonance frequency fs = 65 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 5,9 Ohm force factor BL = 7,6 N/A voice coil inductance L = 0,32 mH effective piston radiating area Sd = 95 cm² effective mechanical mass incl. air load 11 g equivalent volume of compliance Vas = 6,8 l total Q factor Qts = 0,4 (Qms=2,48, Qes=0,47) voice coil diameter = 38 mm mounting diameter d = 123 mm overall diameter d = 155 mm mounting depth (not countersunk) t = 88 mm mass m = 1,35 kg PDF data sheet
Full Range
	SP-5/4 order no. mo-103500 EUR 2,29 4 cm full range driver with high quality cone. power handling (continuous/programme) = 2/4 W impedance R = 4 Ohm mounting diameter d = 47 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 21 mm
	SP-5/8 order no. mo-104570 EUR 4,19 4 cm full range driver with high quality cone. power handling (continuous/programme) = 6/12 W impedance R = 8 Ohm mounting diameter d = 47 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 24 mm
	SP-5/16 order no. mo-104550 EUR 3,59 4 cm full range driver with high quality cone. power handling (continuous/programme) = 6/12 W impedance R = 16 Ohm mounting diameter d = 47 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 24 mm
	SP-5/32 order no. mo-104560 EUR 2,79 4 cm full range driver with high quality cone. power handling (continuous/programme) = 6/12 W impedance R = 32 Ohm mounting diameter d = 47 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 24 mm
	SP-5/8SQ order no. mo-104580 EUR 11,99 4 cm full range driver with high quality cone. power handling (continuous/programme) = 10/20 W impedance R = 8 Ohm mounting diameter d = 45 mm overall diameter d = 51 mm mounting depth (not countersunk) t = 34 mm
	SP-6/4 order no. mo-103520 EUR 2,59 5 cm full range driver with high quality cone. power handling (continuous/programme) = 3/5 W impedance R = 4 Ohm mounting diameter d = 52,5 mm overall diameter d = 57 mm mounting depth (not countersunk) t = 25,5 mm
	SP-6/4SQ order no. mo-103540 EUR 2,69 5 cm full range driver with high quality cone. power handling (continuous/programme) = 3/5 W impedance R = 4 Ohm mounting diameter d = 52,5 mm overall diameter d = 59 mm mounting depth (not countersunk) t = 26 mm
	SP-6/4SQS order no. mo-103550 EUR 3,59 5 cm full range driver with high quality cone. power handling (continuous/programme) = 3/5 W impedance R = 4 Ohm mounting diameter d = 52,5 mm overall diameter d = 59 mm mounting depth (not countersunk) t = 33,5 mm
	SP-6/8SQ order no. mo-104590 EUR 10,50 3 cm full range driver with high quality cone. power handling (continuous/programme) = 10/20 W impedance R = 8 Ohm overall diameter d = 55 mm mounting depth (not countersunk) t = 34 mm
	SP-7/4S order no. mo-103570 - not available 6 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 4/8 W impedance R = 8 Ohm mounting diameter d = 61 mm overall diameter d = 66,5 mm mounting depth (not countersunk) t = 33,5 mm
	SP-7/4SQ order no. mo-103580 EUR 2,99 6 cm full range driver with high quality cone. power handling (continuous/programme) = 4/8 W impedance R = 8 Ohm mounting diameter d = 61 mm overall diameter d = 66,5 mm mounting depth (not countersunk) t = 26 mm
	SP-7/4SQS order no. mo-103590 EUR 3,49 6 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 4/8 W impedance R = 8 Ohm mounting diameter d = 61 mm overall diameter d = 66,5 mm mounting depth (not countersunk) t = 33,5 mm
	SP-59/4S order no. mo-103700 EUR 4,59 $dd cm full range driver with high quality cone. power handling (continuous/programme) = 3/5 W impedance R = 4 Ohm mounting diameter d = 47x85 mm overall diameter d = 50x90 mm mounting depth (not countersunk) t = 42 mm
	SP-30 order no. mo-101530 EUR 12,40 7 cm full range driver with high quality cone. power handling (continuous/programme) = 20/50 W frequency range = f3-15000 Hz resonance frequency fs = 150 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) mounting diameter d = 73 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 40 mm mass m = 0,03 kg
recommended cabinet 1: closed cabinet with 0,31 L volume from 206/130 Hz (-3dB/-8dB) recommended cabinet 2: 1,2 L volume bass reflex cabinet with 2cm-Rohr reflex tube, 6 cm long. from 102/82 Hz (-3dB/-8dB).	SPH-30X/4 order no. mo-104400 EUR 32,45 7 cm full range driver with kevlar cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 20/50 W frequency range = f3-17000 Hz resonance frequency fs = 105 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,55 Ohm force factor BL = 3,91 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 30 cm² effective mechanical mass incl. air load 2,63 g equivalent volume of compliance Vas = 1,06 l total Q factor Qts = 0,39 (Qms=9,35, Qes=0,41) voice coil diameter = 21 mm mounting diameter d = 73 mm overall diameter d = 80,5 mm mounting depth (not countersunk) t = 42 mm mass m = 0,15 kg
recommended cabinet 1: closed cabinet with 0,48 L volume from 180/114 Hz (-3dB/-8dB) recommended cabinet 2: 2 L volume bass reflex cabinet with 2cm-Rohr reflex tube, 5 cm long. from 85/71 Hz (-3dB/-8dB).	SPH-30X/8 order no. mo-104410 EUR 32,45 7 cm full range driver with kevlar cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 20/50 W frequency range = f3-17000 Hz resonance frequency fs = 105 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 4,48 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 30 cm² effective mechanical mass incl. air load 2,65 g equivalent volume of compliance Vas = 1,13 l total Q factor Qts = 0,46 (Qms=8,59, Qes=0,49) voice coil diameter = 21 mm mounting diameter d = 73 mm overall diameter d = 80,5 mm mounting depth (not countersunk) t = 42 mm mass m = 0,15 kg
	SP-8/4SQ order no. mo-103620 EUR 5,99 8 cm full range driver with high quality cone. power handling (continuous/programme) = 10/20 W impedance R = 4 Ohm mounting diameter d = 79 mm overall diameter d = 88,5 mm mounting depth (not countersunk) t = 45 mm
	SP-8/4SQS order no. mo-103630 EUR 6,99 8 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 10/20 W impedance R = 4 Ohm mounting diameter d = 79 mm overall diameter d = 88,5 mm mounting depth (not countersunk) t = 53,5 mm
	SP-8/4 order no. mo-103600 EUR 5,79 8 cm full range driver with high quality cone. power handling (continuous/programme) = 10/20 W impedance R = 4 Ohm mounting diameter d = 70 mm overall diameter d = 90 mm mounting depth (not countersunk) t = 38 mm
	SP-8/4S order no. mo-103610 EUR 6,99 8 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 10/20 W impedance R = 4 Ohm mounting diameter d = 70 mm overall diameter d = 90 mm mounting depth (not countersunk) t = 46,5 mm
	SP-7W order no. mo-100750 EUR 6,89 9 cm full range driver with high quality cone. power handling (continuous/programme) = 4/7 W frequency range = f3-10000 Hz resonance frequency fs = 160 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 40 mm mass m = 0,03 kg
	SP-455/8 order no. mo-102230 EUR 6,49 9 cm full range driver with high quality cone. power handling (continuous/programme) = 5/7 W frequency range = f3-18000 Hz resonance frequency fs = 140 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) mounting diameter d = 94 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 37 mm mass m = 0,03 kg
	SP-170 order no. mo-100350 EUR 6,19 $dd cm full range driver with high quality cone. power handling (continuous/programme) = 1/2 W frequency range = f3-10000 Hz impedance R = 8 Ohm overall diameter d = 106x68 mm mounting depth (not countersunk) t = 32 mm mass m = 0,07 kg
	SP-40 order no. mo-100670 EUR 12,50 10 cm full range driver with high quality cone. The ribber surround is invers. power handling (continuous/programme) = 8/16 W frequency range = f3-10000 Hz resonance frequency fs = 75 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 103 mm mounting depth (not countersunk) t = 55 mm mass m = 0,07 kg
	SP-10/4 order no. mo-103640 EUR 7,89 10 cm full range driver with high quality cone. power handling (continuous/programme) = 15/25 W impedance R = 4 Ohm mounting diameter d = 103 mm overall diameter d = 105 mm mounting depth (not countersunk) t = 55 mm
	SP-10/4S order no. mo-103650 EUR 8,89 10 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 15/25 W impedance R = 4 Ohm mounting diameter d = 103 mm overall diameter d = 105 mm mounting depth (not countersunk) t = 64 mm
	SP-13/4 order no. mo-103660 EUR 9,95 12 cm full range driver with high quality cone. power handling (continuous/programme) = 20/40 W impedance R = 4 Ohm mounting diameter d = 120 mm overall diameter d = 128 mm mounting depth (not countersunk) t = 60 mm mass m = 0,62 kg
	SP-272/8 order no. mo-102190 EUR 7,90 12 cm full range driver with high quality cone. power handling (continuous/programme) = 5/7 W frequency range = f3-17000 Hz resonance frequency fs = 120 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) mounting diameter d = 108 mm overall diameter d = 131 mm mounting depth (not countersunk) t = 44 mm mass m = 0,32 kg
	SP-13/4S order no. mo-103670 - not available 12 cm full range driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 20/40 W impedance R = 4 Ohm mounting diameter d = 120 mm overall diameter d = 128 mm mounting depth (not countersunk) t = 75 mm mass m = 0,89 kg
recommended cabinet 1: closed cabinet with 3 L volume from 112/71 Hz (-3dB/-8dB) recommended cabinet 2: 11,7 L volume bass reflex cabinet with HP50 reflex tube, 11 cm long. from 55/44 Hz (-3dB/-8dB).	SPH-60X order no. mo-100920 EUR 24,90 12 cm full range driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = f3-20000 Hz resonance frequency fs = 60 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 5,1 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 80 cm² effective mechanical mass incl. air load 5,9 g equivalent volume of compliance Vas = 9 l total Q factor Qts = 0,42 (Qms=2,17, Qes=0,53) voice coil diameter = 25,5 mm mounting diameter d = 122 mm overall diameter d = 130 mm mounting depth (not countersunk) t = 71 mm mass m = 1,1 kg
recommended cabinet 1: closed cabinet with 3,2 L volume from 112/71 Hz (-3dB/-8dB) recommended cabinet 2: 12,6 L volume bass reflex cabinet with HP50 reflex tube, 10 cm long. from 55/44 Hz (-3dB/-8dB).	SPH-68X/AD order no. mo-101390 EUR 31,90 12 cm full range driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = f3-20000 Hz resonance frequency fs = 60 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 5,7 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 80 cm² effective mechanical mass incl. air load 6,5 g equivalent volume of compliance Vas = 9,7 l total Q factor Qts = 0,42 (Qms=3,19, Qes=0,49) voice coil diameter = 25,5 mm mounting diameter d = 122 mm overall diameter d = 130 mm mounting depth (not countersunk) t = 71 mm mass m = 1,1 kg
	SP-130X / 8 order no. mo-104690 EUR 15,80 12 cm full range driver with paper cone. power handling (continuous/programme) = 10/30 W frequency range = f3-20000 Hz resonance frequency fs = 145 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 2,8 N/A voice coil inductance L = 0,25 mH effective piston radiating area Sd = 83 cm² effective mechanical mass incl. air load 3 g equivalent volume of compliance Vas = 3,8 l total Q factor Qts = 1,47 (Qms=3,43, Qes=2,57) voice coil diameter = 19 mm mounting diameter d = 112 mm overall diameter d = 130 mm mounting depth (not countersunk) t = 52 mm mass m = 0,24 kg
	SP-50X order no. mo-100720 EUR 20,00 12 cm full range driver with high quality cone. The ribber surround is invers. power handling (continuous/programme) = 25/50 W frequency range = f3-20000 Hz resonance frequency fs = 65 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 115 mm overall diameter d = 135 mm mounting depth (not countersunk) t = 66 mm mass m = 0,08 kg
	SP-155X order no. mo-101360 EUR 34,90 15 cm full range driver with high quality cone. power handling (continuous/programme) = 25/50 W frequency range = f3-20000 Hz resonance frequency fs = 70 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) mounting diameter d = 146 mm overall diameter d = 155 mm mounting depth (not countersunk) t = 75 mm mass m = 1,25 kg
	SP-276/8 order no. mo-102210 EUR 9,90 15 cm full range driver with high quality cone. power handling (continuous/programme) = 5/7 W frequency range = f3-18000 Hz resonance frequency fs = 100 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) mounting diameter d = 145 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 53 mm mass m = 0,37 kg
	SP-165x/8 order no. mo-104700 - not available 15 cm full range driver with high quality cone. power handling (continuous/programme) = 15/30 W frequency range = f3-20000 Hz resonance frequency fs = 120 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 7,1 Ohm force factor BL = 3,23 N/A voice coil inductance L = 0,25 mH effective piston radiating area Sd = 141 cm² effective mechanical mass incl. air load 5 g equivalent volume of compliance Vas = 9,6 l total Q factor Qts = 1,48 (Qms=3,45, Qes=2,6) voice coil diameter = 19 mm mounting diameter d = 148 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 66 mm mass m = 0,35 kg
	SP-17/4SQ order no. mo-103690 - not available 15 cm full range driver with high quality cone. power handling (continuous/programme) = 30/60 W impedance R = 4 Ohm mounting diameter d = 147 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 73 mm mass m = 1,09 kg
	SP-17/4 order no. mo-103680 EUR 14,49 16 cm full range driver with high quality cone. power handling (continuous/programme) = 30/60 W impedance R = 4 Ohm mounting diameter d = 147 mm overall diameter d = 169 mm mounting depth (not countersunk) t = 79 mm
	SP-80X order no. mo-100760 - not available 19 cm full range driver with high quality cone. power handling (continuous/programme) = 35/70 W frequency range = f3-20000 Hz resonance frequency fs = 50 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 184 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 80 mm mass m = 1 kg
	SP-200MX/4 order no. mo-104480 EUR 24,90 19 cm full range driver with paper cone. power handling (continuous/programme) = 30/60 W frequency range = f3-17000 Hz resonance frequency fs = 79 Hz impedance R = 4 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 4,2 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 201 cm² effective mechanical mass incl. air load 9,5 g equivalent volume of compliance Vas = 24 l total Q factor Qts = 0,78 (Qms=3,21, Qes=1,03) voice coil diameter = 25 mm mounting diameter d = 174 mm overall diameter d = 199 mm mounting depth (not countersunk) t = 80 mm mass m = 0,9 kg
	SP-200MX/8 order no. mo-104490 - not available 19 cm full range driver with paper cone. power handling (continuous/programme) = 30/60 W frequency range = f3-17500 Hz resonance frequency fs = 78 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 7,4 Ohm force factor BL = 5,1 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 201 cm² effective mechanical mass incl. air load 9,2 g equivalent volume of compliance Vas = 25 l total Q factor Qts = 0,91 (Qms=3,03, Qes=1,3) voice coil diameter = 25 mm mounting diameter d = 174 mm overall diameter d = 199 mm mounting depth (not countersunk) t = 80 mm mass m = 0,9 kg
recommended cabinet 1: closed cabinet with 28 L volume from 78/49 Hz (-3dB/-8dB) recommended cabinet 2: 116 L volume bass reflex cabinet with HP70 reflex tube, 1 cm long. from 36/30 Hz (-3dB/-8dB).	SP-200 X order no. mo-100400 EUR 44,85 19 cm full range driver with high quality cone. power handling (continuous/programme) = 70/35 W frequency range = f3-15000 Hz resonance frequency fs = 50 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 6,1 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 210 cm² effective mechanical mass incl. air load 11,5 g equivalent volume of compliance Vas = 48 l total Q factor Qts = 0,52 (Qms=1,96, Qes=0,7) voice coil diameter = 25,5 mm mounting diameter d = 182 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 80 mm mass m = 1,3 kg
	SP-205/8 order no. mo-104460 EUR 11,40 19 cm full range driver with high quality cone. power handling (continuous/programme) = 8/10 W frequency range = 3-17500 Hz resonance frequency fs = 100 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) mounting diameter d = 180 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 63 mm mass m = 0,37 kg
recommended cabinet 1: closed cabinet with 1,6 L volume from 137/87 Hz (-3dB/-8dB) recommended cabinet 2: 6,2 L volume bass reflex cabinet with HP35 reflex tube, 6 cm long. from 61/54 Hz (-3dB/-8dB).	SPX-32TB order no. mo-105240 EUR 29,00 8 cm full range driver with paper cone. The spider is rear ventilated for better cooling. The cone is equipped with a phase plug. The basket is made of die-cast. power handling (continuous/programme) = 20/40 W frequency range = 3-20000 Hz resonance frequency fs = 100 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,6 Ohm force factor BL = 3,51 N/A voice coil inductance L = 0,22 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 1,1 g equivalent volume of compliance Vas = 1,7 l total Q factor Qts = 0,58 (Qms=4,97, Qes=0,66) voice coil diameter = 20 mm mounting diameter d = 75,5 mm overall diameter d = 93 mm mounting depth (not countersunk) t = 56 mm mass m = 0,55 kg PDF data sheet
	SPX-31TB order no. mo-105230 EUR 23,50 7 cm full range driver with paper cone. The cone is equipped with a phase plug. The driver is magnetically shielded. power handling (continuous/programme) = 20/40 W frequency range = 3-20000 Hz resonance frequency fs = 105 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 3,57 N/A voice coil inductance L = 0,36 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 1,4 l total Q factor Qts = 0,65 (Qms=4,14, Qes=0,77) voice coil diameter = 20 mm mounting diameter d = 71 mm overall diameter d = 81 mm mounting depth (not countersunk) t = 59 mm mass m = 0,6 kg PDF data sheet
	SPX-30TB order no. mo-105220 EUR 23,50 8 cm full range driver with paper cone. The driver is magnetically shielded. The basket is made of die-cast. The spider is rear ventilated for better cooling. power handling (continuous/programme) = 20/40 W frequency range = 3-20000 Hz resonance frequency fs = 110 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6,8 Ohm force factor BL = 3,9 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 1,3 l total Q factor Qts = 0,62 (Qms=5,04, Qes=0,71) voice coil diameter = 20 mm mounting diameter d = 75 mm overall diameter d = 93 mm mounting depth (not countersunk) t = 60,5 mm mass m = 0,6 kg PDF data sheet
recommended cabinet 1: closed cabinet with 0,53 L volume from 287/181 Hz (-3dB/-8dB) recommended cabinet 2: 2,1 L volume bass reflex cabinet with 2cm-Rohr reflex tube, 1 cm long. from 137/113 Hz (-3dB/-8dB).	SPX-21TB order no. mo-105210 EUR 23,50 5 cm full range driver with high quality cone. The magnet system is based on Neodymium technology. The voice coil is made of kapton. power handling (continuous/programme) = 12/25 W frequency range = 3-20000 Hz resonance frequency fs = 160 Hz impedance R = 4 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,32 mH effective piston radiating area Sd = 13 cm² effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 1,4 l total Q factor Qts = 0,44 (Qms=1,36, Qes=0,65) voice coil diameter = 20 mm mounting diameter d = 51,5 mm overall diameter d = 58 mm mounting depth (not countersunk) t = 40 mm mass m = 0,1 kg PDF data sheet
	SPX-20TB order no. mo-105200 EUR 21,00 10 cm full range driver with high quality cone. The spider is rear ventilated for better cooling. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 15/30 W frequency range = 3-20000 Hz resonance frequency fs = 167 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 7,1 Ohm force factor BL = 5,14 N/A voice coil inductance L = 0,42 mH effective piston radiating area Sd = 13 cm² effective mechanical mass incl. air load 1,3 g equivalent volume of compliance Vas = 0,2 l total Q factor Qts = 0,32 (Qms=3,41, Qes=0,35) voice coil diameter = 25 mm mounting diameter d = 92 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 76,5 mm mass m = 0,15 kg
Woofer
recommended cabinet 1: closed cabinet with 1,2 L volume from 170/108 Hz (-3dB/-8dB) recommended cabinet 2: 4,9 L volume bass reflex cabinet with HP35 reflex tube, 4 cm long. from 76/66 Hz (-3dB/-8dB).	SP-45/4 order no. mo-100680 EUR 12,00 7 cm bass driver with high quality cone. power handling (continuous/programme) = 20/40 W frequency range = f3-16000 Hz resonance frequency fs = 120 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 2,4 N/A voice coil inductance L = 0,1 mH effective piston radiating area Sd = 31 cm² effective mechanical mass incl. air load 1,6 g equivalent volume of compliance Vas = 1,5 l total Q factor Qts = 0,55 (Qms=2,82, Qes=0,68) voice coil diameter = 19 mm mounting diameter d = 72 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 43 mm mass m = 0,045 kg
recommended cabinet 1: closed cabinet with 0,69 L volume from 202/127 Hz (-3dB/-8dB) recommended cabinet 2: 2,8 L volume bass reflex cabinet with HP35 reflex tube, 6 cm long. from 95/79 Hz (-3dB/-8dB).	SP-45/8 order no. mo-100690 EUR 12,00 7 cm bass driver with high quality cone. power handling (continuous/programme) = 20/40 W frequency range = f3-16000 Hz resonance frequency fs = 120 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 1,5 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,15 mH effective piston radiating area Sd = 31 cm² effective mechanical mass incl. air load 1,6 g equivalent volume of compliance Vas = 1,5 l total Q factor Qts = 0,48 (Qms=1,6, Qes=0,68) voice coil diameter = 19 mm mounting diameter d = 72 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 43 mm mass m = 0,045 kg
recommended cabinet 1: closed cabinet with 1,5 L volume from 123/78 Hz (-3dB/-8dB) recommended cabinet 2: 5,8 L volume bass reflex cabinet with HP35 reflex tube, 9 cm long. from 55/48 Hz (-3dB/-8dB).	SPH-75/8 order no. mo-102770 EUR 15,40 7 cm bass driver with polypropylene cone. power handling (continuous/programme) = 15/30 W frequency range = f3-16000 Hz resonance frequency fs = 85 Hz impedance R = 8 Ohm sound pressure level SPL = 83 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,15 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load 2,7 g equivalent volume of compliance Vas = 1,9 l total Q factor Qts = 0,56 (Qms=3,9, Qes=0,65) voice coil diameter = 20,5 mm mounting diameter d = 72 mm overall diameter d = 78 mm mounting depth (not countersunk) t = 42 mm mass m = 0,04 kg
recommended cabinet 1: closed cabinet with 2,9 L volume from 107/68 Hz (-3dB/-8dB) recommended cabinet 2: 11,9 L volume bass reflex cabinet with HP50 reflex tube, 11 cm long. from 50/42 Hz (-3dB/-8dB).	SP-60/4 order no. mo-100730 EUR 15,50 10 cm bass driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = f3-8000 Hz resonance frequency fs = 65 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 2,9 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4 g equivalent volume of compliance Vas = 6 l total Q factor Qts = 0,49 (Qms=2,1, Qes=0,64) voice coil diameter = 25,5 mm mounting diameter d = 96 mm overall diameter d = 105 mm mounting depth (not countersunk) t = 60 mm mass m = 0,9 kg
recommended cabinet 1: closed cabinet with 2,9 L volume from 107/68 Hz (-3dB/-8dB) recommended cabinet 2: 11,9 L volume bass reflex cabinet with HP50 reflex tube, 11 cm long. from 50/42 Hz (-3dB/-8dB).	SP-60/8 order no. mo-100740 EUR 15,40 10 cm bass driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/60 W frequency range = f3-8000 Hz resonance frequency fs = 65 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 4,1 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 55 cm² effective mechanical mass incl. air load 4 g equivalent volume of compliance Vas = 6 l total Q factor Qts = 0,49 (Qms=2,1, Qes=0,64) voice coil diameter = 25,5 mm mounting diameter d = 96 mm overall diameter d = 105 mm mounting depth (not countersunk) t = 60 mm mass m = 0,9 kg
	SPW-130/4 order no. mo-104760 - not available 12 cm bass-midrange driver with paper cone. power handling (continuous/programme) = 60/100 W frequency range = 30-3500 Hz resonance frequency fs = 52 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) equivalent volume of compliance Vas = 9 l total Q factor Qts = 0,41 (Qms=$qms, Qes=$qes) mounting diameter d = 113 mm overall diameter d = 125 mm mounting depth (not countersunk) t = 63,2 mm
	SPW-130/8 order no. mo-104770 EUR 21,90 12 cm bass-midrange driver with high quality cone. power handling (continuous/programme) = 60/100 W frequency range = f3-3500 Hz resonance frequency fs = 52 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) equivalent volume of compliance Vas = 9 l total Q factor Qts = 0,41 (Qms=$qms, Qes=$qes) mounting diameter d = 113 mm overall diameter d = 125 mm mounting depth (not countersunk) t = 63,2 mm
	SPW-130M/8 order no. mo-104780 - not available 12 cm midrange driver with paper cone. power handling (continuous/programme) = 25/75 W frequency range = f3-5000 Hz resonance frequency fs = 125 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) equivalent volume of compliance Vas = 2,5 l total Q factor Qts = 1,3 (Qms=$qms, Qes=$qes) mounting diameter d = 112 mm overall diameter d = 125 mm mounting depth (not countersunk) t = 63,2 mm
recommended cabinet 1: closed cabinet with 4,7 L volume from 80/51 Hz (-3dB/-8dB) recommended cabinet 2: 17 L volume bass reflex cabinet with HP50 reflex tube, 15 cm long. from 40/32 Hz (-3dB/-8dB).	SPH-135C order no. mo-102310 EUR 65,90 12 cm midrange driver with high quality cone. power handling (continuous/programme) = 50/80 W frequency range = f3-8000 Hz resonance frequency fs = 40 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 6,5 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 33,3 cm² effective mechanical mass incl. air load 12 g equivalent volume of compliance Vas = 17 l total Q factor Qts = 0,39 (Qms=4,48, Qes=0,43) voice coil diameter = 35,5 mm mounting diameter d = 122 mm overall diameter d = 133 mm mounting depth (not countersunk) t = 75 mm mass m = 1,5 kg
recommended cabinet 1: closed cabinet with 2,1 L volume from 120/75 Hz (-3dB/-8dB) recommended cabinet 2: 6,3 L volume bass reflex cabinet with HP35 reflex tube, 9 cm long. from 66/51 Hz (-3dB/-8dB).	SPH-135KEP order no. mo-102410 EUR 65,90 12 cm midrange driver with kevlar cone. The cone is equipped with a phase plug. power handling (continuous/programme) = 50/80 W frequency range = f3-10000 Hz resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 7,5 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 95 cm² effective mechanical mass incl. air load 10 g equivalent volume of compliance Vas = 15,5 l total Q factor Qts = 0,3 (Qms=5,54, Qes=0,32) voice coil diameter = 35,5 mm mounting diameter d = 122 mm overall diameter d = 133 mm mounting depth (not countersunk) t = 75 mm mass m = 1,52 kg
recommended cabinet 1: closed cabinet with 3,2 L volume from 98/62 Hz (-3dB/-8dB) recommended cabinet 2: 10,7 L volume bass reflex cabinet with HP50 reflex tube, 17 cm long. from 51/40 Hz (-3dB/-8dB).	SPP-135S order no. mo-102600 - not available 13 cm midrange driver with polypropylene cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 30/50 W frequency range = f3-8000 Hz resonance frequency fs = 43 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 6,6 N/A voice coil inductance L = 1,25 mH effective piston radiating area Sd = 95 cm² effective mechanical mass incl. air load 10 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,35 (Qms=3,53, Qes=0,39) voice coil diameter = 25,5 mm mounting diameter d = 122 mm overall diameter d = 134 mm mounting depth (not countersunk) t = 74 mm mass m = 1 kg
recommended cabinet 1: closed cabinet with 5,7 L volume from 73/46 Hz (-3dB/-8dB) recommended cabinet 2: 22 L volume bass reflex cabinet with HP50 reflex tube, 14 cm long. from 35/29 Hz (-3dB/-8dB).	SPH-135TC, 2x8 Ohm order no. mo-101430 EUR 36,45 13 cm midrange driver with polypropylene cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x30/60 W frequency range = f3-6000 Hz resonance frequency fs = 40 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 2x7,5/3,8 Ohm force factor BL = 4,2 N/A voice coil inductance L = 2x0,6/0,6 mH effective piston radiating area Sd = 95 cm² effective mechanical mass incl. air load 8,9 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,42 (Qms=3,44, Qes=0,48) voice coil diameter = 20 mm mounting diameter d = 122 mm overall diameter d = 138 mm mounting depth (not countersunk) t = 70 mm mass m = 1,2 kg
recommended cabinet 1: closed cabinet with 3,5 L volume from 95/60 Hz (-3dB/-8dB) recommended cabinet 2: 11 L volume bass reflex cabinet with HP50 reflex tube, 18 cm long. from 51/40 Hz (-3dB/-8dB).	SPH-130 order no. mo-100870 EUR 44,85 13 cm midrange driver with paper cone. power handling (continuous/programme) = 55/80 W frequency range = f3-6000 Hz resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 5,4 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 80 cm² effective mechanical mass incl. air load 8,2 g equivalent volume of compliance Vas = 22 l total Q factor Qts = 0,32 (Qms=1,91, Qes=0,39) voice coil diameter = 25 mm mounting diameter d = 129 mm overall diameter d = 145 mm mounting depth (not countersunk) t = 65 mm mass m = 0,75 kg
recommended cabinet 1: closed cabinet with 3,9 L volume from 91/57 Hz (-3dB/-8dB) recommended cabinet 2: 16 L volume bass reflex cabinet with HP70 reflex tube, 25 cm long. from 42/35 Hz (-3dB/-8dB).	SPW-150/8S order no. mo-104790 EUR 24,45 13 cm midrange driver with high quality cone. The driver is magnetically shielded. power handling (continuous/programme) = 50/100 W frequency range = f3-3000 Hz resonance frequency fs = 55 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 7,6 Ohm force factor BL = 5,7 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 80 cm² effective mechanical mass incl. air load 8,6 g equivalent volume of compliance Vas = 8 l total Q factor Qts = 0,49 (Qms=1,59, Qes=0,71) voice coil diameter = 25 mm mounting diameter d = 113,6 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 75 mm mass m = 0,8 kg
	SPH-130AL order no. mo-103820 EUR 61,90 14 cm midrange driver with aluminium cone. power handling (continuous/programme) = 50/100 W frequency range = f3-4500 Hz resonance frequency fs = 48 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6,4 Ohm force factor BL = 7,22 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 80 cm² effective mechanical mass incl. air load 9 g equivalent volume of compliance Vas = 10,8 l total Q factor Qts = 0,32 (Qms=5,07, Qes=0,34) voice coil diameter = 25 mm mounting diameter d = 113 mm overall diameter d = 155 mm mounting depth (not countersunk) t = 70 mm mass m = 1 kg
	SPH-165 order no. mo-100880 EUR 55,90 15 cm midrange driver with high quality cone. power handling (continuous/programme) = 50/100 W frequency range = f3-5000 Hz resonance frequency fs = 33 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 9,7 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 137 cm² effective mechanical mass incl. air load 16 g equivalent volume of compliance Vas = 36 l total Q factor Qts = 0,21 (Qms=2,02, Qes=0,23) voice coil diameter = 35,5 mm mounting diameter d = 142 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 89 mm mass m = 2,32 kg
recommended cabinet 1: closed cabinet with 5,6 L volume from 77/49 Hz (-3dB/-8dB) recommended cabinet 2: 17 L volume bass reflex cabinet with HP50 reflex tube, 17 cm long. from 42/33 Hz (-3dB/-8dB).	SPH-165KEP order no. mo-102420 EUR 84,90 15 cm bass driver with kevlar cone. The cone is equipped with a phase plug. power handling (continuous/programme) = 60/100 W frequency range = f3-7000 Hz resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 7,6 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 127 cm² effective mechanical mass incl. air load 17 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,31 (Qms=4,85, Qes=0,33) voice coil diameter = 35,5 mm mounting diameter d = 142 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 90 mm mass m = 1,71 kg
recommended cabinet 1: closed cabinet with 5,6 L volume from 77/49 Hz (-3dB/-8dB) recommended cabinet 2: 17 L volume bass reflex cabinet with HP50 reflex tube, 17 cm long. from 42/33 Hz (-3dB/-8dB).	SPH-165CP order no. mo-102330 EUR 88,90 15 cm midrange driver with carbon cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 80/120 W frequency range = f3-6000 Hz resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 7,6 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 127 cm² effective mechanical mass incl. air load 17 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,31 (Qms=4,85, Qes=0,33) voice coil diameter = 50 mm mounting diameter d = 142 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 90 mm mass m = 2,5 kg
recommended cabinet 1: closed cabinet with 10,3 L volume from 62/39 Hz (-3dB/-8dB) recommended cabinet 2: 40 L volume bass reflex cabinet with HP70 reflex tube, 21 cm long. from 30/24 Hz (-3dB/-8dB).	SPH-170TC, 2x8 Ohm order no. mo-101440 EUR 40,45 15 cm midrange driver with polypropylene cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x40/60 W frequency range = f3-5000 Hz resonance frequency fs = 33 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 2x7,5/3,8 Ohm force factor BL = 5,2 N/A voice coil inductance L = 2x0,6/0,6 mH effective piston radiating area Sd = 127 cm² effective mechanical mass incl. air load 16 g equivalent volume of compliance Vas = 31 l total Q factor Qts = 0,41 (Qms=2,98, Qes=0,48) voice coil diameter = 25,5 mm mounting diameter d = 142 mm overall diameter d = 166 mm mounting depth (not countersunk) t = 82 mm mass m = 1,4 kg
recommended cabinet 1: closed cabinet with 3,3 L volume from 111/70 Hz (-3dB/-8dB) recommended cabinet 2: 9,1 L volume bass reflex cabinet with HP50 reflex tube, 16 cm long. from 63/48 Hz (-3dB/-8dB).	PRONEO-6 order no. mo-132150 EUR 179,00 15 cm bass-midrange driver with carbon cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 100/150 W frequency range = 3-4000 Hz resonance frequency fs = 39 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 6,51 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 137 cm² effective mechanical mass incl. air load 14,5 g equivalent volume of compliance Vas = 28 l total Q factor Qts = 0,27 (Qms=4,64, Qes=0,29) voice coil diameter = 3,5 mm mounting diameter d = 142 mm overall diameter d = 168 mm mounting depth (not countersunk) t = 77 mm PDF data sheet
	SP-150 order no. mo-100320 EUR 34,90 16 cm bass driver with polypropylene cone. power handling (continuous/programme) = 30/60 W frequency range = f3-4000 Hz resonance frequency fs = 35 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 145 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 75 mm mass m = 1,2 kg
	SPW-170/8 order no. mo-104850 - not available 16 cm bass-midrange driver with polypropylene cone. power handling (continuous/programme) = 60/100 W frequency range = f3-5000 Hz resonance frequency fs = 49 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) equivalent volume of compliance Vas = 20 l total Q factor Qts = 0,69 (Qms=$qms, Qes=$qes) mounting diameter d = 148 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 72,7 mm
	SP-300 order no. mo-100540 - not available 29 cm bass driver with high quality cone. power handling (continuous/programme) = 50/100 W frequency range = f3-4000 Hz resonance frequency fs = 25 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) mounting diameter d = 275 mm overall diameter d = 305 mm mounting depth (not countersunk) t = 130 mm mass m = 2,8 kg
recommended cabinet 1: closed cabinet with 6,1 L volume from 85/53 Hz (-3dB/-8dB) recommended cabinet 2: 22 L volume bass reflex cabinet with HP70 reflex tube, 21 cm long. from 43/34 Hz (-3dB/-8dB).	SPH-176 order no. mo-104250 EUR 48,85 16 cm midrange driver with paper cone . power handling (continuous/programme) = 70/120 W frequency range = f3-4500 Hz resonance frequency fs = 39 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,6 Ohm force factor BL = 7,7 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 140 cm² effective mechanical mass incl. air load 14 g equivalent volume of compliance Vas = 27 l total Q factor Qts = 0,37 (Qms=2,27, Qes=0,44) voice coil diameter = 25 mm mounting diameter d = 144 mm overall diameter d = 175 mm mounting depth (not countersunk) t = 75 mm mass m = 1,25 kg
	SPH-170C order no. mo-104120 EUR 71,90 16 cm midrange driver with carbon cone. power handling (continuous/programme) = 60/120 W frequency range = f3-3500 Hz resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 9,44 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 127 cm² effective mechanical mass incl. air load 16,43 g equivalent volume of compliance Vas = 24 l total Q factor Qts = 0,26 (Qms=7,22, Qes=0,27) voice coil diameter = 37 mm mounting diameter d = 145 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 90 mm
recommended cabinet 1: closed cabinet with 9,5 L volume from 76/48 Hz (-3dB/-8dB) recommended cabinet 2: 32 L volume bass reflex cabinet with HP70 reflex tube, 17 cm long. from 39/31 Hz (-3dB/-8dB).	SPH-175 order no. mo-101370 EUR 53,50 17 cm midrange driver with paper cone. power handling (continuous/programme) = 60/100 W frequency range = f3-3000 Hz resonance frequency fs = 33 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 6 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 137 cm² effective mechanical mass incl. air load 12,5 g equivalent volume of compliance Vas = 48 l total Q factor Qts = 0,35 (Qms=1,98, Qes=0,43) voice coil diameter = 25 mm mounting diameter d = 162 mm overall diameter d = 177 mm mounting depth (not countersunk) t = 69 mm mass m = 1,2 kg
recommended cabinet 1: closed cabinet with 14 L volume from 68/43 Hz (-3dB/-8dB) recommended cabinet 2: 56 L volume bass reflex cabinet with HP70 reflex tube, 11 cm long. from 33/27 Hz (-3dB/-8dB).	SPH-170 order no. mo-100110 EUR 53,90 17 cm midrange driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. The basket is made of die-cast. The rubber surround is invers. power handling (continuous/programme) = 50/90 W frequency range = f3-5000 Hz resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 5,9 N/A voice coil inductance L = 0,45 mH effective piston radiating area Sd = 137 cm² effective mechanical mass incl. air load 12,5 g equivalent volume of compliance Vas = 37 l total Q factor Qts = 0,45 (Qms=2,38, Qes=0,55) voice coil diameter = 25 mm mounting diameter d = 150 mm overall diameter d = 185 mm mounting depth (not countersunk) t = 80 mm mass m = 1,32 kg
	SPW-170/4 order no. mo-104840 - not available 16 cm bass-midrange driver with paper cone. power handling (continuous/programme) = 60/100 W frequency range = f3-5000 Hz resonance frequency fs = 49 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) equivalent volume of compliance Vas = 20 l total Q factor Qts = 0,69 (Qms=$qms, Qes=$qes) mounting diameter d = 148 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 75,7 mm
	SPW-188/8 order no. mo-104860 - not available 17 cm bass-midrange driver with paper cone. power handling (continuous/programme) = 60/120 W frequency range = f3-4000 Hz resonance frequency fs = 49 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) equivalent volume of compliance Vas = 20 l mounting diameter d = 146 mm overall diameter d = 188 mm mounting depth (not countersunk) t = 80 mm
	SP-90 order no. mo-100770 EUR 30,45 19 cm bass driver with high quality cone. power handling (continuous/programme) = 35/70 W frequency range = f3-8000 Hz resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) mounting diameter d = 185 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 90 mm
	SPW-205/4 order no. mo-104870 - not available 19 cm bass-midrange driver with high quality cone. power handling (continuous/programme) = 70/150 W frequency range = f3-5000 Hz resonance frequency fs = 37 Hz impedance R = 4 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) equivalent volume of compliance Vas = 50 l total Q factor Qts = 0,65 (Qms=$qms, Qes=$qes) mounting diameter d = 181 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 93 mm
	SPW-205/8 order no. mo-104880 - not available 19 cm bass-midrange driver with high quality cone. power handling (continuous/programme) = 70/150 W frequency range = f3-5000 Hz resonance frequency fs = 37 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) equivalent volume of compliance Vas = 50 l total Q factor Qts = 0,65 (Qms=$qms, Qes=$qes) mounting diameter d = 181 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 93 mm
	SPH-200TC, 2x8Ohm order no. mo-101690 EUR 64,90 20 cm bass driver with polypropylene cone. The voice coil is made of kapton. power handling (continuous/programme) = 2x60/100 W frequency range = f3-4000 Hz resonance frequency fs = 28 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 2x6,8 Ohm force factor BL = 8,9 N/A voice coil inductance L = 2x1,0 mH effective piston radiating area Sd = 210 cm² effective mechanical mass incl. air load 32 g equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,24 (Qms=6,19, Qes=0,25) voice coil diameter = 50 mm mounting diameter d = 185 mm overall diameter d = 210 mm mounting depth (not countersunk) t = 102 mm mass m = 2,6 kg
	SPH-210 order no. mo-100890 EUR 61,90 20 cm midrange driver with high quality cone. power handling (continuous/programme) = 50/100 W frequency range = f3-4000 Hz resonance frequency fs = 28 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 10,3 N/A voice coil inductance L = 1 mH effective piston radiating area Sd = 210 cm² effective mechanical mass incl. air load 24,5 g equivalent volume of compliance Vas = 81 l total Q factor Qts = 0,24 (Qms=2,14, Qes=0,27) voice coil diameter = 35,5 mm mounting diameter d = 183 mm overall diameter d = 210 mm mounting depth (not countersunk) t = 99 mm
	SPH-200CTC, 2x8 Ohm order no. mo-101810 EUR 84,90 20 cm bass driver with carbon cone. power handling (continuous/programme) = 2x60/100 W frequency range = f3-4000 Hz resonance frequency fs = 22 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 2x6,8/3,4 Ohm force factor BL = 9 N/A voice coil inductance L = 2x1,0 mH effective piston radiating area Sd = 214 cm² effective mechanical mass incl. air load 45 g equivalent volume of compliance Vas = 75 l total Q factor Qts = 0,22 (Qms=4,91, Qes=0,23) voice coil diameter = 50 mm mounting diameter d = 181 mm overall diameter d = 211 mm mounting depth (not countersunk) t = 115 mm
recommended cabinet 1: closed cabinet with 13 L volume from 59/37 Hz (-3dB/-8dB) recommended cabinet 2: 47 L volume bass reflex cabinet with HP70 reflex tube, 20 cm long. from 30/24 Hz (-3dB/-8dB).	SPH-200KE order no. mo-102370 EUR 105,00 20 cm midrange driver with kevlar cone. The voice coil is made of kapton. The basket is made of die-cast. power handling (continuous/programme) = 80/120 W frequency range = f3-4500 Hz resonance frequency fs = 28 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 9,9 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 207 cm² effective mechanical mass incl. air load 37 g equivalent volume of compliance Vas = 54 l total Q factor Qts = 0,38 (Qms=4,65, Qes=0,41) voice coil diameter = 50 mm mounting diameter d = 182 mm overall diameter d = 212 mm mounting depth (not countersunk) t = 100 mm
recommended cabinet 1: closed cabinet with 24 L volume from 59/37 Hz (-3dB/-8dB) recommended cabinet 2: 91 L volume bass reflex cabinet with HP100 reflex tube, 21 cm long. from 29/23 Hz (-3dB/-8dB).	SPH-212 order no. mo-101340 EUR 67,90 20 cm bass driver with paper cone. power handling (continuous/programme) = 80/120 W frequency range = f3-3000 Hz resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 7,6 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 218 cm² effective mechanical mass incl. air load 25 g equivalent volume of compliance Vas = 82 l total Q factor Qts = 0,41 (Qms=2,21, Qes=0,5) voice coil diameter = 25 mm mounting diameter d = 195 mm overall diameter d = 212 mm mounting depth (not countersunk) t = 100 mm
	SPH-225 C order no. mo-104130 EUR 119,00 20 cm bass driver with high quality cone. The voice coil is made of kapton. power handling (continuous/programme) = 100/150 W frequency range = f3-3000 Hz resonance frequency fs = 39 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 5,9 Ohm force factor BL = 13,17 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 201 cm² effective mechanical mass incl. air load 36,6 g equivalent volume of compliance Vas = 24 l total Q factor Qts = 0,29 (Qms=4,94, Qes=0,31) voice coil diameter = 50 mm mounting diameter d = 181 mm overall diameter d = 222 mm mounting depth (not countersunk) t = 102 mm
	SPW-226/8 order no. mo-104890 - not available 21 cm bass driver with paper cone. power handling (continuous/programme) = 70/150 W frequency range = 3-5000 Hz resonance frequency fs = 37 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,52 (Qms=$qms, Qes=$qes) mounting diameter d = 186 mm overall diameter d = 226 mm mounting depth (not countersunk) t = 106 mm
recommended cabinet 1: closed cabinet with 41 L volume from 49/31 Hz (-3dB/-8dB) recommended cabinet 2: 166 L volume bass reflex cabinet with HP100 reflex tube, 14 cm long. from 22/19 Hz (-3dB/-8dB).	SPH-8XTB order no. mo-105190 EUR 161,00 21 cm bass driver with paper cone. The spider is rear ventilated for better cooling. To avoid compression effects the driver possesses a pole piece hole. In linear operation the underhang voice coil remains completely within the magnetic field. power handling (continuous/programme) = 80/160 W frequency range = 3-2000 Hz resonance frequency fs = 34 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 6,14 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 230 cm² effective mechanical mass incl. air load 30 g equivalent volume of compliance Vas = 54 l total Q factor Qts = 0,54 (Qms=3,71, Qes=0,63) voice coil diameter = 38 mm mounting diameter d = 189 mm overall diameter d = 224 mm mounting depth (not countersunk) t = 154 mm mass m = 7,4 kg PDF data sheet
recommended cabinet 1: closed cabinet with 25 L volume from 59/37 Hz (-3dB/-8dB) recommended cabinet 2: 102 L volume bass reflex cabinet with HP100 reflex tube, 18 cm long. from 28/23 Hz (-3dB/-8dB).	SPH-8TB order no. mo-105180 EUR 66,00 21 cm bass driver with polypropylene cone. power handling (continuous/programme) = 60/120 W frequency range = 3-2500 Hz resonance frequency fs = 35 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 8,43 N/A voice coil inductance L = 1 mH effective piston radiating area Sd = 240 cm² effective mechanical mass incl. air load 30 g equivalent volume of compliance Vas = 55 l total Q factor Qts = 0,48 (Qms=3,2, Qes=0,56) voice coil diameter = 38 mm mounting diameter d = 189 mm overall diameter d = 224 mm mounting depth (not countersunk) t = 96 mm mass m = 2 kg PDF data sheet
10 inch woofer
	SPP-250 order no. mo-101100 EUR 43,90 24 cm bass driver with polypropylene cone. power handling (continuous/programme) = 37/75 W frequency range = 3-3000 Hz resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 5,4 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 346 cm² effective mechanical mass incl. air load 30 g equivalent volume of compliance Vas = 155 l total Q factor Qts = 0,9 (Qms=3,29, Qes=1,25) voice coil diameter = 35,5 mm mounting diameter d = 235 mm overall diameter d = 255 mm mounting depth (not countersunk) t = 110 mm mass m = 1,7 kg
recommended cabinet 1: closed cabinet with 22 L volume from 61/39 Hz (-3dB/-8dB) recommended cabinet 2: 56 L volume bass reflex cabinet with HP100 reflex tube, 36 cm long. from 36/27 Hz (-3dB/-8dB).	SPH-250CTC, 2x8 Ohm order no. mo-101820 EUR 99,90 24 cm bass driver with carbon cone. The driver is made with a double voice coil and the given impedance values are for connection in series. The basket is made of die-cast. power handling (continuous/programme) = 2x100/150 W frequency range = f3-3500 Hz resonance frequency fs = 20 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 2x6,8/3,4 Ohm force factor BL = 9,6 N/A voice coil inductance L = 2x1,0 mH effective piston radiating area Sd = 343 cm² effective mechanical mass incl. air load 70 g equivalent volume of compliance Vas = 220 l total Q factor Qts = 0,25 (Qms=5,12, Qes=0,26) voice coil diameter = 50 mm mounting diameter d = 229 mm overall diameter d = 256 mm mounting depth (not countersunk) t = 120 mm mass m = 3,8 kg
recommended cabinet 1: closed cabinet with 17 L volume from 76/48 Hz (-3dB/-8dB) recommended cabinet 2: 41 L volume bass reflex cabinet with HP100 reflex tube, 32 cm long. from 46/34 Hz (-3dB/-8dB).	SPH-255 order no. mo-100900 EUR 89,90 24 cm midrange driver with high quality cone. power handling (continuous/programme) = 60/120 W frequency range = f3-3000 Hz resonance frequency fs = 23 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 11,7 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 350 cm² effective mechanical mass incl. air load 42 g equivalent volume of compliance Vas = 205 l total Q factor Qts = 0,24 (Qms=2,86, Qes=0,26) voice coil diameter = 50 mm mounting diameter d = 235 mm overall diameter d = 257 mm mounting depth (not countersunk) t = 108 mm mass m = 3,22 kg
recommended cabinet 1: closed cabinet with 8,4 L volume from 79/50 Hz (-3dB/-8dB) recommended cabinet 2: 21 L volume bass reflex cabinet with HP70 reflex tube, 26 cm long. from 47/35 Hz (-3dB/-8dB).	SPH-250TC, 2x8 Ohm order no. mo-101450 EUR 69,90 24 cm bass driver with polypropylene cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x100 W frequency range = f3-3500 Hz resonance frequency fs = 26 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 11,1 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 346 cm² effective mechanical mass incl. air load 55 g equivalent volume of compliance Vas = 84 l total Q factor Qts = 0,25 (Qms=3,31, Qes=0,27) voice coil diameter = 50 mm mounting diameter d = 232 mm overall diameter d = 258 mm mounting depth (not countersunk) t = 115 mm mass m = 4 kg
recommended cabinet 1: closed cabinet with 64 L volume from 44/28 Hz (-3dB/-8dB) recommended cabinet 2: 246 L volume bass reflex cabinet with HP100 reflex tube, 11 cm long. from 22/17 Hz (-3dB/-8dB).	SPH-250KE order no. mo-102380 EUR 129,00 24 cm bass driver with kevlare cone. The basket is made of die-cast. power handling (continuous/programme) = 100/150 W frequency range = f3-3000 Hz resonance frequency fs = 23 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 9,4 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 346 cm² effective mechanical mass incl. air load 45 g equivalent volume of compliance Vas = 204 l total Q factor Qts = 0,41 (Qms=5,25, Qes=0,45) voice coil diameter = 50 mm mounting diameter d = 232 mm overall diameter d = 258 mm mounting depth (not countersunk) t = 120 mm mass m = 3 kg
recommended cabinet 1: closed cabinet with 20 L volume from 80/50 Hz (-3dB/-8dB) recommended cabinet 2: 63 L volume bass reflex cabinet with HP100 reflex tube, 15 cm long. from 43/33 Hz (-3dB/-8dB).	SP-250P order no. mo-100500 EUR 76,50 25 cm bass driver with high quality cone. To avoid compression effects the driver possesses a pole piece hole. power handling (continuous/programme) = 100/200 W frequency range = f3-4000 Hz resonance frequency fs = 33 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 10,8 N/A voice coil inductance L = 1,2 mH effective piston radiating area Sd = 346 cm² effective mechanical mass incl. air load 33 g equivalent volume of compliance Vas = 115 l total Q factor Qts = 0,33 (Qms=2,33, Qes=0,38) voice coil diameter = 50 mm mounting diameter d = 233 mm overall diameter d = 265 mm mounting depth (not countersunk) t = 120 mm mass m = 3,9 kg
recommended cabinet 1: closed cabinet with 22 L volume from 68/43 Hz (-3dB/-8dB) recommended cabinet 2: 57 L volume bass reflex cabinet with HP100 reflex tube, 28 cm long. from 39/30 Hz (-3dB/-8dB).	SPH-265 order no. mo-101350 EUR 105,00 25 cm bass driver with paper cone. power handling (continuous/programme) = 125/250 W frequency range = f3-2500 Hz resonance frequency fs = 23 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 10,1 N/A voice coil inductance L = 0,9 mH effective piston radiating area Sd = 325 cm² effective mechanical mass incl. air load 36,5 g equivalent volume of compliance Vas = 199 l total Q factor Qts = 0,27 (Qms=1,95, Qes=0,32) voice coil diameter = 50 mm mounting diameter d = 246 mm overall diameter d = 265 mm mounting depth (not countersunk) t = 115 mm mass m = 3,1 kg
recommended cabinet 1: closed cabinet with 12,8 L volume from 85/54 Hz (-3dB/-8dB) recommended cabinet 2: 36 L volume bass reflex cabinet with HP100 reflex tube, 27 cm long. from 48/36 Hz (-3dB/-8dB).	SPH-275C order no. mo-104140 EUR 143,00 26 cm bass driver with carbon cone. The voice coil is made of kapton. power handling (continuous/programme) = 120/200 W frequency range = f3-4000 Hz resonance frequency fs = 31 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 13,83 N/A voice coil inductance L = 1 mH effective piston radiating area Sd = 363 cm² effective mechanical mass incl. air load 48,33 g equivalent volume of compliance Vas = 100 l total Q factor Qts = 0,29 (Qms=6,41, Qes=0,3) voice coil diameter = 50 mm mounting diameter d = 232 mm overall diameter d = 276 mm mounting depth (not countersunk) t = 120 mm
12 inch woofer
recommended cabinet 1: closed cabinet with 26 L volume from 76/48 Hz (-3dB/-8dB) recommended cabinet 2: 57 L volume bass reflex cabinet with HP100 reflex tube, 21 cm long. from 47/35 Hz (-3dB/-8dB).	SPH-315 order no. mo-100910 EUR 98,00 29 cm bass driver with polypropylene cone. power handling (continuous/programme) = 100/200 W frequency range = f3-2000 Hz resonance frequency fs = 22 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 6,1 Ohm force factor BL = 13,4 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 510 cm² effective mechanical mass incl. air load 55 g equivalent volume of compliance Vas = 330 l total Q factor Qts = 0,23 (Qms=2,4, Qes=0,26) voice coil diameter = 50 mm mounting diameter d = 278 mm overall diameter d = 305 mm mounting depth (not countersunk) t = 136 mm mass m = 4,2 kg
recommended cabinet 1: closed cabinet with 27 L volume from 73/46 Hz (-3dB/-8dB) recommended cabinet 2: 65 L volume bass reflex cabinet with 2x HP100 reflex tube, 40 cm long. from 43/33 Hz (-3dB/-8dB).	SPH-300TC, 2x8 Ohm order no. mo-101460 EUR 88,90 29 cm bass driver with polypropylene cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x120/250 W frequency range = f3-2000 Hz resonance frequency fs = 23 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 2x6,3 Ohm force factor BL = 10,3 N/A voice coil inductance L = 2x1,0 mH effective piston radiating area Sd = 495 cm² effective mechanical mass incl. air load 68 g equivalent volume of compliance Vas = 290 l total Q factor Qts = 0,24 (Qms=3,03, Qes=0,26) voice coil diameter = 50 mm mounting diameter d = 280 mm overall diameter d = 306 mm mounting depth (not countersunk) t = 140 mm mass m = 4 kg
recommended cabinet 1: closed cabinet with 114 L volume from 41/26 Hz (-3dB/-8dB) recommended cabinet 2: 467 L volume bass reflex cabinet with 2x HP100 reflex tube, 11 cm long. from 19/16 Hz (-3dB/-8dB).	SPP-300 order no. mo-101120 EUR 78,00 29 cm bass driver with polypropylene cone. power handling (continuous/programme) = 45/90 W frequency range = f3-2500 Hz resonance frequency fs = 25 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 10,4 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 510 cm² effective mechanical mass incl. air load 63 g equivalent volume of compliance Vas = 235 l total Q factor Qts = 0,48 (Qms=2,43, Qes=0,6) voice coil diameter = 35,5 mm mounting diameter d = 275 mm overall diameter d = 307 mm mounting depth (not countersunk) t = 135 mm mass m = 3 kg
	SPH-300CTC, 2x8 Ohm order no. mo-101830 EUR 160,00 29 cm bass driver with carbon cone. power handling (continuous/programme) = 2x150 W frequency range = f3-2600 Hz resonance frequency fs = 18 Hz impedance R = 4 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 12,1 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 495 cm² effective mechanical mass incl. air load 100 g equivalent volume of compliance Vas = 225 l total Q factor Qts = 0,19 (Qms=6,5, Qes=0,2) voice coil diameter = 62 mm mounting diameter d = 272 mm overall diameter d = 308 mm mounting depth (not countersunk) t = 130 mm mass m = 6 kg
recommended cabinet 1: closed cabinet with 43 L volume from 53/34 Hz (-3dB/-8dB) recommended cabinet 2: 138 L volume bass reflex cabinet with 2x HP100 reflex tube, 33 cm long. from 28/22 Hz (-3dB/-8dB).	SPH-300KE order no. mo-102390 EUR 149,00 29 cm bass driver with kevlar cone. The basket is made of die-cast. power handling (continuous/programme) = 120/200 W frequency range = f3-2200 Hz resonance frequency fs = 22 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 12,5 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 496 cm² effective mechanical mass incl. air load 65 g equivalent volume of compliance Vas = 250 l total Q factor Qts = 0,33 (Qms=4,15, Qes=0,36) voice coil diameter = 65,5 mm mounting diameter d = 272 mm overall diameter d = 309 mm mounting depth (not countersunk) t = 130 mm mass m = 5,4 kg
recommended cabinet 1: closed cabinet with 29 L volume from 84/53 Hz (-3dB/-8dB) recommended cabinet 2: 109 L volume bass reflex cabinet with 2x HP100 reflex tube, 12 cm long. from 42/34 Hz (-3dB/-8dB).	SP-30/200NEO order no. mo-105100 EUR 99,00 30 cm bass driver with high quality cone. The magnet system is based on Neodymium technology. power handling (continuous/programme) = 200/400 W frequency range = f3-3000 Hz resonance frequency fs = 43 Hz impedance R = 8 Ohm sound pressure level SPL = 98 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 13,96 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 510 cm² effective mechanical mass incl. air load 50 g equivalent volume of compliance Vas = 98 l total Q factor Qts = 0,41 (Qms=5,77, Qes=0,44) voice coil diameter = 50 mm mounting diameter d = 284 mm overall diameter d = 315 mm mounting depth (not countersunk) t = 135 mm mass m = 1,7 kg
recommended cabinet 1: closed cabinet with 31 L volume from 70/44 Hz (-3dB/-8dB) recommended cabinet 2: 78 L volume bass reflex cabinet with 2x HP100 reflex tube, 35 cm long. from 41/31 Hz (-3dB/-8dB).	SPP-300/AD order no. mo-101130 EUR 129,00 31 cm midrange driver with polypropylene cone. The basket is made of die-cast. power handling (continuous/programme) = 125/250 W frequency range = f3-2000 Hz resonance frequency fs = 23 Hz impedance R = 8 Ohm sound pressure level SPL = 94 dB (2,83V; 1m) DC resistance Re = 6,3 Ohm force factor BL = 14 N/A voice coil inductance L = 1,4 mH effective piston radiating area Sd = 530 cm² effective mechanical mass incl. air load 62 g equivalent volume of compliance Vas = 305 l total Q factor Qts = 0,26 (Qms=2,25, Qes=0,3) voice coil diameter = 50 mm mounting diameter d = 275 mm overall diameter d = 330 mm mounting depth (not countersunk) t = 110 mm mass m = 4,5 kg
recommended cabinet 1: closed cabinet with 23 L volume from 50/32 Hz (-3dB/-8dB) recommended cabinet 2: 93 L volume bass reflex cabinet with HP100 reflex tube, 30 cm long. from 23/19 Hz (-3dB/-8dB).	RAPTOR-12MK2 order no. mo-100210 EUR 322,00 30 cm bass driver with aluminium cone. power handling (continuous/programme) = 1000/1500 W frequency range = 3-300 Hz resonance frequency fs = 34 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 16,6 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 470 cm² effective mechanical mass incl. air load 211 g equivalent volume of compliance Vas = 32 l total Q factor Qts = 0,52 (Qms=7,87, Qes=0,56) voice coil diameter = 77 mm mounting diameter d = 282 mm overall diameter d = 320 mm mounting depth (not countersunk) t = 227 mm mass m = 13,1 kg PDF data sheet
15 inch woofer
recommended cabinet 1: closed cabinet with 63 L volume from 63/39 Hz (-3dB/-8dB) recommended cabinet 2: 172 L volume bass reflex cabinet with 2x HP100 reflex tube, 16 cm long. from 36/27 Hz (-3dB/-8dB).	SPH-390TC, 2x8 Ohm order no. mo-101520 EUR 139,00 37 cm bass driver with polypropylene cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x150 W frequency range = f3-1500 Hz resonance frequency fs = 22 Hz impedance R = 4 Ohm sound pressure level SPL = 96 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 11,95 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 850 cm² effective mechanical mass incl. air load 99,8 g equivalent volume of compliance Vas = 531 l total Q factor Qts = 0,27 (Qms=4,51, Qes=0,29) voice coil diameter = 65,5 mm mounting diameter d = 353 mm overall diameter d = 385 mm mounting depth (not countersunk) t = 170 mm mass m = 7,5 kg
recommended cabinet 1: closed cabinet with 32 L volume from 61/39 Hz (-3dB/-8dB) recommended cabinet 2: 89 L volume bass reflex cabinet with 2x HP100 reflex tube, 41 cm long. from 35/26 Hz (-3dB/-8dB).	SPH-380TC, 2x4 Ohm order no. mo-103260 EUR 279,00 38 cm bass driver with high quality cone. The driver is made with a double voice coil and the given impedance values are for connection in series. power handling (continuous/programme) = 2x250/400 W frequency range = f3-800 Hz resonance frequency fs = 21,5 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 25 N/A voice coil inductance L = 4,4 mH effective piston radiating area Sd = 845 cm² effective mechanical mass incl. air load 199,5 g equivalent volume of compliance Vas = 275 l total Q factor Qts = 0,28 (Qms=2,81, Qes=0,31) voice coil diameter = 75,5 mm mounting diameter d = 356 mm overall diameter d = 402 mm mounting depth (not countersunk) t = 180 mm mass m = 11 kg
	RAPTOR-15MK2 order no. mo-100220 EUR 389,00 38 cm bass driver with aluminium cone. power handling (continuous/programme) = 1000/1500 W frequency range = 3-300 Hz resonance frequency fs = 31 Hz impedance R = 4 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 15,53 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 810 cm² effective mechanical mass incl. air load 260 g equivalent volume of compliance Vas = 87 l total Q factor Qts = 0,69 (Qms=8,5, Qes=0,75) voice coil diameter = 77 mm mounting diameter d = 361 mm overall diameter d = 397 mm mounting depth (not countersunk) t = 267 mm mass m = 13,8 kg PDF data sheet
18 inch woofer
recommended cabinet 1: closed cabinet with 44 L volume from 63/40 Hz (-3dB/-8dB) recommended cabinet 2: 108 L volume bass reflex cabinet with 2x HP100 reflex tube, 30 cm long. from 38/28 Hz (-3dB/-8dB).	SPH-450TC, 2x4 Ohm order no. mo-103270 EUR 399,00 44 cm bass driver with high quality cone. power handling (continuous/programme) = 2x150/300 W frequency range = f3-1500 Hz resonance frequency fs = 20 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 7,4 Ohm force factor BL = 32,4 N/A voice coil inductance L = 4,6 mH effective piston radiating area Sd = 1250 cm² effective mechanical mass incl. air load 305 g equivalent volume of compliance Vas = 480 l total Q factor Qts = 0,25 (Qms=2,97, Qes=0,27) voice coil diameter = 99,3 mm mounting diameter d = 425 mm overall diameter d = 460 mm mounting depth (not countersunk) t = 220 mm mass m = 17 kg
no longer sold
	DM-510 order no. mo-100030 - not available 11 cm midrange driver with titanium cone. power handling (continuous/programme) = 75/150 W frequency range = 900-5000 Hz resonance frequency fs = 800 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm voice coil inductance L = 0,15 mH effective mechanical mass incl. air load 1,27 g total Q factor Qts = 0,56 (Qms=0,96, Qes=1,32) voice coil diameter = 49,5 mm mounting diameter d = 102 mm overall diameter d = 115 mm mounting depth (not countersunk) t = 30 mm mass m = 1,1 kg
	DMH-150 order no. mo-101700 EUR 43,80 14 cm midrange driver with high quality cone. power handling (continuous/programme) = 50 W frequency range = 600-8000 Hz resonance frequency fs = 350 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) voice coil diameter = 50 mm mounting diameter d = 124 mm overall diameter d = 153 mm
	SPW-150M/8 order no. mo-104800 - not available 13 cm midrange driver with high quality cone. power handling (continuous/programme) = 25/75 W frequency range = f3-5000 Hz resonance frequency fs = 98 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) equivalent volume of compliance Vas = 3,4 l total Q factor Qts = 0,9 (Qms=$qms, Qes=$qes) mounting diameter d = 112 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 63,5 mm
	SP-7/4 order no. mo-103560 - not available 6 cm full range driver with high quality cone. power handling (continuous/programme) = 4/8 W impedance R = 8 Ohm mounting diameter d = 61 mm overall diameter d = 66,5 mm mounting depth (not countersunk) t = 26 mm

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.