The reviewers of Klang+Ton 3/98 awarded 8 points (that's a straight "B") to the Sub 10 and described the subwoofer as follows: "The Alcone Sub 10 subwoofer produces a very low, yet absolutely precise bass and shows an enormous power handling.Additionally, a full house of all sorts of imaginable features makes it easy for the user to operate the unit. This subwoofer has all that it takes to become a classic."
Now a new amplifier was added: Detonation DT 150. DT 150 consumes as little as 0.3W in standby.
The frequency range (right hand) with a separation frequency of the amplifier module of 100 Hz (blue) and 60 Hz (red)
The RCM Detonation DT 150, amplifier module is located at the rear of the cabinet. The module features state-of-the-art Class D amplification ensuring enormous power output with top quality sound, fitted in a small cabinet.
Connection is straight forward and simple: - The two wires on the rear side of the module have to be connected to the driver - The two left and two right loudspeaker output terminals of your amplifier have to be connected to the four binding posts of the module That's it! Should you want to release your speakers of the duty to produce low bass - that's were a subwoofer is at its best - then they should be connected to the low level RCA connectors. Otherwise, there are five different, additional ways to connect your amplifier to the module. Please contact us if you need help.
The kit consists of: - the AC 10 HE bass driver - the Detonation DT 150 amplifier module - 1 metre cable 2x2,5 mm2 - 6 Allan screws 5x30mm - 12 wood screws Pan 4x20 - building instruction
Alcone Sub 10 (without cabinet) EUR 329,00
... more power: Sub20 ... more affordable: Sub10 ASW
Home