Visaton-Lautsprecher

Visaton

Visaton is one of the most known brands for DIY in Germany. Visaton has the best descriptions for the kits; they deliver high quality speaker - and the whole range of speaker for any application.

	CP13 order no. V-4454 EUR 28,90 13 mm tweeter with high quality cone power handling (continuous/programme) = 60 / 100 W resonance frequency fs = 2400 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 33,5 mm overall diameter d = 39 mm mounting depth (not countersunk) t = 20 mm
	G20SC order no. V-1185 EUR 49,40 20 mm tweeter with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 1800 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) mounting diameter d = 66 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 27 mm
	G25FFL order no. V-1175 EUR 58,90 25 mm tweeter with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 80 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 24 mm
	SC10N order no. V-8011 EUR 18,80 25 mm tweeter with high quality cone power handling (continuous/programme) = 100 / 150 W resonance frequency fs = 1700 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 85 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 32 mm
	KE25SC order no. V-1191 EUR 127,00 25 mm tweeter with high quality cone power handling (continuous/programme) = 80 / 140 W resonance frequency fs = kompensiert Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) mounting diameter d = 82 mm overall diameter d = 104,5 mm mounting depth (not countersunk) t = 55 mm
	DSM25FFL order no. V-1153 EUR 55,90 50 mm tweeter with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 1900 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) mounting diameter d = 80 mm overall diameter d = 110 mm mounting depth (not countersunk) t = 24 mm
	MHT12 order no. V-1080 EUR 188,00 20 / 14 mm tweeter with high quality cone power handling (continuous/programme) = 150 / 200 W impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 112 mm mounting depth (not countersunk) t = 46 mm
	DTW8.12NG order no. V-1033 no longer deliverable> 25 mm tweeter with high quality cone power handling (continuous/programme) = 110 / 150 W resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 80 mm overall diameter d = 115x82 mm mounting depth (not countersunk) t = 24 mm
	SC4ND order no. V-8054 - not available 25 mm tweeter with high quality cone power handling (continuous/programme) = 80 / 120 W resonance frequency fs = 1300 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 50 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 15 mm
	SC5 order no. V-8005 EUR 10,50 13 mm tweeter with high quality cone power handling (continuous/programme) = 60 / 100 W resonance frequency fs = 2500 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 48 mm overall diameter d = 59,5 mm mounting depth (not countersunk) t = 22,5 mm
	DTW72 order no. V-1004 EUR 12,50 14 mm tweeter with high quality cone power handling (continuous/programme) = 70 / 110 W resonance frequency fs = 3000 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 50 mm overall diameter d = 72 mm mounting depth (not countersunk) t = 17,5 mm
	DT94 order no. V-9003 EUR 22,55 20 mm tweeter with high quality cone power handling (continuous/programme) = 70 / 100 W resonance frequency fs = 1900 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 64 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 19 mm
	DT94 order no. V-9004 EUR 22,55 20 mm tweeter with high quality cone power handling (continuous/programme) = 70 / 100 W resonance frequency fs = 1900 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 64 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 19 mm
	G50FFL order no. V-1176 EUR 82,90 50 mm tweeter with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 700 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 106 mm overall diameter d = 140 mm mounting depth (not countersunk) t = 48 mm
	DSM50FFL order no. V-1163 EUR 92,90 50 mm tweeter with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 600 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 106 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 48 mm
	K50WP order no. V-2915 EUR 4,59 4 cm coax driver with polypropylene cone power handling (continuous/programme) = 1 / 2 W resonance frequency fs = 300 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 46 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 18,5 mm
	K50WP-50 order no. V-2916 EUR 4,59 4 cm coax driver with polypropylene cone power handling (continuous/programme) = 1 / 2 W resonance frequency fs = 300 Hz impedance R = 50 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 46 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 18,5 mm
	K50 order no. V-2901 EUR 1,89 4 cm full range driver with high quality cone power handling (continuous/programme) = 2 / 3 W resonance frequency fs = 350 Hz impedance R = 8 Ohm sound pressure level SPL = 80 dB (2,83V; 1m) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 45 mm overall diameter d = 50 mm mounting depth (not countersunk) t = 74 mm
	FRWS5 order no. V-2209 EUR 8,69 5 cm full range driver with high quality cone power handling (continuous/programme) = 2 / 5 W resonance frequency fs = 320 Hz impedance R = 4 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 1,2 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 12 cm2 effective mechanical mass incl. air load 0,5 g equivalent volume of compliance Vas = 0,12 l total Q factor Qts = 1,59 (Qms=3,17, Qes=3,2) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 45 mm overall diameter d = 62,8 mm mounting depth (not countersunk) t = 22 mm
	FRWS5-8 order no. V-2210 EUR 8,69 5 cm full range driver with high quality cone power handling (continuous/programme) = 2 / 5 W resonance frequency fs = 320 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 1,2 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 12 cm2 effective mechanical mass incl. air load 0,5 g equivalent volume of compliance Vas = 0,12 l total Q factor Qts = 1,59 (Qms=3,17, Qes=3,2) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 45 mm overall diameter d = 62,8 mm mounting depth (not countersunk) t = 22 mm
	FRWS5SC order no. V-2220 EUR 10,80 5 cm full range driver with high quality cone power handling (continuous/programme) = 2 / 5 W resonance frequency fs = 320 Hz impedance R = 8 Ohm sound pressure level SPL = 80 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 1,2 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 12 cm2 effective mechanical mass incl. air load 0,5 g equivalent volume of compliance Vas = 0,12 l total Q factor Qts = 1,59 (Qms=3,17, Qes=3,2) mounting diameter d = 45 mm overall diameter d = 62,8 mm mounting depth (not countersunk) t = 22 mm
	K64WP order no. V-2918 EUR 5,39 6 cm coax driver with polypropylene cone power handling (continuous/programme) = 1 / 2 W resonance frequency fs = 300 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 60 mm overall diameter d = 64 mm mounting depth (not countersunk) t = 19,5 mm
	K64WP-50 order no. V-2919 EUR 5,39 6 cm coax driver with polypropylene cone power handling (continuous/programme) = 1 / 2 W resonance frequency fs = 300 Hz impedance R = 50 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 60 mm overall diameter d = 64 mm mounting depth (not countersunk) t = 19,5 mm
	FRS5 order no. V-2231 EUR 8,69 6 cm full range driver with high quality cone power handling (continuous/programme) = 5 / 8 W resonance frequency fs = 250 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 6,6 Ohm force factor BL = 1,6 N/A voice coil inductance L = 0,31 mH effective piston radiating area Sd = 12 cm2 effective mechanical mass incl. air load 0,5 g equivalent volume of compliance Vas = 0,19 l total Q factor Qts = 1,29 (Qms=3,89, Qes=1,92) maximum peak linear excursion vibration x_lin = +/- 0,4 mm mounting diameter d = 46 mm overall diameter d = 68 mm mounting depth (not countersunk) t = 31,5 mm
	FRS7 order no. V-2011 EUR 9,49 7 cm full range driver with high quality cone power handling (continuous/programme) = 8 / 15 W resonance frequency fs = 250 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 1,72 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 22 cm2 effective mechanical mass incl. air load 0,8 g equivalent volume of compliance Vas = 0,3 l total Q factor Qts = 1,22 (Qms=3,21, Qes=1,96) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 61 mm overall diameter d = 75 mm mounting depth (not countersunk) t = 31 mm
	FRS7-8 order no. V-2012 EUR 9,49 7 cm full range driver with high quality cone power handling (continuous/programme) = 8 / 15 W resonance frequency fs = 250 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 1,72 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 22 cm2 effective mechanical mass incl. air load 0,8 g equivalent volume of compliance Vas = 0,3 l total Q factor Qts = 1,22 (Qms=3,21, Qes=1,96) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 61 mm overall diameter d = 75 mm mounting depth (not countersunk) t = 31 mm
	TW70 order no. V-9002 EUR 11,80 7 cm full range driver with high quality cone power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 64 mm overall diameter d = 74 mm mounting depth (not countersunk) t = 29 mm
	FRS7S order no. V-2018 EUR 9,49 7 cm full range driver with high quality cone power handling (continuous/programme) = 8 / 15 W resonance frequency fs = 250 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 1,72 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 22 cm2 equivalent volume of compliance Vas = 0,3 l total Q factor Qts = 1,22 (Qms=3,21, Qes=1,96) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 61 mm overall diameter d = 75 mm mounting depth (not countersunk) t = 31 mm
	SC8N order no. V-8018 EUR 18,90 7 cm full range driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 94 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 6,6 Ohm force factor BL = 2,8 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 32 cm2 effective mechanical mass incl. air load 2,5 g equivalent volume of compliance Vas = 1,7 l total Q factor Qts = 0,96 (Qms=4,55, Qes=1,21) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 73 mm overall diameter d = 80 mm mounting depth (not countersunk) t = 45 mm
	FR8WP order no. V-2128 EUR 15,20 8 cm full range driver with high quality cone power handling (continuous/programme) = 15 / 25 W resonance frequency fs = 158 Hz impedance R = 4 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 4,1 Ohm voice coil inductance L = 0,33 mH effective piston radiating area Sd = 30 cm2 total Q factor Qts = 0,88 (Qms=2,62, Qes=1,33) mounting diameter d = 73 mm overall diameter d = 90 mm mounting depth (not countersunk) t = 37 mm
	F8SC order no. V-8027 no longer available 8 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 103 Hz impedance R = 4 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 2,1 N/A voice coil inductance L = 0,18 mH effective piston radiating area Sd = 30 cm2 effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 1,4 l total Q factor Qts = 1,01 (Qms=3,03, Qes=1,52) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 78 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 42 mm
	F8SC-8 order no. V-8028 EUR 10,80 8 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 103 Hz impedance R = 8 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 2,1 N/A voice coil inductance L = 0,18 mH effective piston radiating area Sd = 30 cm2 effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 1,4 l total Q factor Qts = 1,01 (Qms=3,03, Qes=1,52) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 78 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 42 mm
	TW6NG order no. V-1000 EUR 10,60 6 cm full range driver with high quality cone power handling (continuous/programme) = 60 / 100 W resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) mounting diameter d = 56 mm overall diameter d = 67 mm mounting depth (not countersunk) t = 27 mm
	FRS8 order no. V-2003 EUR 10,90 8 cm full range driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 130 Hz impedance R = 4 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 2,2 N/A voice coil inductance L = 0,43 mH effective piston radiating area Sd = 31 cm2 effective mechanical mass incl. air load 2,5 g equivalent volume of compliance Vas = 0,8 l total Q factor Qts = 1,07 (Qms=3,84, Qes=1,49) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 75 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 35,5 mm
	FRS8-8 order no. V-2004 EUR 10,90 8 cm full range driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 130 Hz impedance R = 8 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 2,2 N/A voice coil inductance L = 0,43 mH effective piston radiating area Sd = 31 cm2 effective mechanical mass incl. air load 2,5 g equivalent volume of compliance Vas = 0,8 l total Q factor Qts = 1,07 (Qms=3,84, Qes=1,49) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 75 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 35,5 mm
	FR8 order no. V-2007 EUR 8,19 9 cm full range driver with high quality cone power handling (continuous/programme) = 10 / 15 W resonance frequency fs = 150 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 2,11 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 30 cm2 effective mechanical mass incl. air load 1,6 g equivalent volume of compliance Vas = 0,64 l total Q factor Qts = 0,87 (Qms=5,41, Qes=1,03) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 80 mm overall diameter d = 96 mm mounting depth (not countersunk) t = 37 mm
	FR8-8 order no. V-2008 EUR 8,19 9 cm full range driver with high quality cone power handling (continuous/programme) = 10 / 15 W resonance frequency fs = 150 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 2,11 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 30 cm2 effective mechanical mass incl. air load 1,7 g equivalent volume of compliance Vas = 0,64 l total Q factor Qts = 0,87 (Qms=5,41, Qes=1,03) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 80 mm overall diameter d = 96 mm mounting depth (not countersunk) t = 37 mm
	FR87 order no. V-4630 EUR 6,69 9 cm full range driver with high quality cone power handling (continuous/programme) = 10 / 15 W resonance frequency fs = 137 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm voice coil inductance L = 0,24 mH effective piston radiating area Sd = 37 cm2 total Q factor Qts = 1,25 (Qms=6,4, Qes=1,56) mounting diameter d = 80 mm overall diameter d = 98 mm mounting depth (not countersunk) t = 39 mm
	DX10 order no. V-4610 EUR 47,55 9 cm coax driver with polypropylene cone power handling (continuous/programme) = 50 / 70 W resonance frequency fs = 110 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) mounting diameter d = 91 mm overall diameter d = 98 mm mounting depth (not countersunk) t = 39 mm
	R10S order no. V-2036 EUR 7,69 9 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 165 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 1,63 N/A voice coil inductance L = 0,24 mH effective piston radiating area Sd = 56 cm2 effective mechanical mass incl. air load 1,9 g equivalent volume of compliance Vas = 2,3 l total Q factor Qts = 1,92 (Qms=5,9, Qes=2,85) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 93 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 36 mm
	R10S-8 order no. V-2037 EUR 7,69 9 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 160 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 7,4 Ohm force factor BL = 2,13 N/A voice coil inductance L = 0,48 mH effective piston radiating area Sd = 56 cm2 effective mechanical mass incl. air load 2 g equivalent volume of compliance Vas = 2,3 l total Q factor Qts = 2,29 (Qms=7,25, Qes=3,34) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 93 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 36 mm
	R10SC order no. V-2040 EUR 8,79 9 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 163 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm force factor BL = 1,64 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 56 cm2 effective mechanical mass incl. air load 1,9 g equivalent volume of compliance Vas = 2,2 l total Q factor Qts = 0,85 (Qms=1,23, Qes=2,74) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 93 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 44 mm
	R10SC-8 order no. V-2041 EUR 8,79 9 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 163 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 7,3 Ohm force factor BL = 1,96 N/A voice coil inductance L = 0,52 mH effective piston radiating area Sd = 56 cm2 effective mechanical mass incl. air load 2,1 g equivalent volume of compliance Vas = 2 l total Q factor Qts = 0,9 (Qms=1,15, Qes=4,08) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 93 mm overall diameter d = 102 mm mounting depth (not countersunk) t = 44 mm
	FRS10WP order no. V-2100 EUR 38,45 10 cm full range driver with high quality cone power handling (continuous/programme) = 25 / 50 W resonance frequency fs = 190 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,8 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 57 cm2 effective mechanical mass incl. air load 2,4 g equivalent volume of compliance Vas = 1,6 l total Q factor Qts = 0,81 (Qms=3,19, Qes=1,08) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 90 mm overall diameter d = 115 mm mounting depth (not countersunk) t = 45 mm
	FRS10WP-8 order no. V-2101 EUR 38,45 10 cm full range driver with high quality cone power handling (continuous/programme) = 25 / 50 W resonance frequency fs = 190 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,8 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 57 cm2 effective mechanical mass incl. air load 3 g equivalent volume of compliance Vas = 1,6 l total Q factor Qts = 0,81 (Qms=3,19, Qes=1,08) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 90 mm overall diameter d = 115 mm mounting depth (not countersunk) t = 45 mm
	FR10F order no. V-4622 EUR 5,79 10 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 133 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm voice coil inductance L = 0,35 mH effective piston radiating area Sd = 52 cm2 total Q factor Qts = 1,52 (Qms=6,5, Qes=1,99) mounting diameter d = 93 mm overall diameter d = 115,5 mm mounting depth (not countersunk) t = 36 mm
	FX10 order no. V-4692 EUR 16,30 10 cm coax driver with paper cone power handling (continuous/programme) = 40 / 70 W resonance frequency fs = 150 Hz impedance R = 4 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 116 mm mounting depth (not countersunk) t = 45 mm
	FR10HM order no. V-4898 EUR 5,89 10 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 120 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 2,12 N/A voice coil inductance L = 0,16 mH effective piston radiating area Sd = 50 cm2 effective mechanical mass incl. air load 2,7 g equivalent volume of compliance Vas = 2,1 l total Q factor Qts = 1,13 (Qms=5,35, Qes=1,44) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 94 mm overall diameter d = 116,5 mm mounting depth (not countersunk) t = 46 mm
	FR10HM-8 order no. V-4899 EUR 5,89 10 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 120 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 2,12 N/A voice coil inductance L = 0,16 mH effective piston radiating area Sd = 50 cm2 effective mechanical mass incl. air load 2,8 g equivalent volume of compliance Vas = 2,1 l total Q factor Qts = 1,13 (Qms=5,35, Qes=1,44) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 94 mm overall diameter d = 116,5 mm mounting depth (not countersunk) t = 46 mm
	M10-4 order no. V-9189 - not available 10 cm midrange driver with high quality cone power handling (continuous/programme) = 80 / 100 W resonance frequency fs = 700 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 117 mm mounting depth (not countersunk) t = 39 mm
	M10-8 order no. V-9089 EUR 11,90 10 cm midrange driver with high quality cone power handling (continuous/programme) = 80 / 100 W resonance frequency fs = 700 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) mounting diameter d = 95 mm overall diameter d = 117 mm mounting depth (not countersunk) t = 39 mm
	DR45N order no. V-6060 EUR 294,00 40 mm tweeter with high quality cone power handling (continuous/programme) = 100 / 150 W resonance frequency fs = 600 Hz impedance R = 8 Ohm sound pressure level SPL = 102 dB (2,83V; 1m) overall diameter d = 121 mm mounting depth (not countersunk) t = 71 mm
recommended cabinet 1: closed cabinet with 1,7 L volume from 131/83 Hz (-3dB/-8dB) recommended cabinet 2: 6 L volume bass reflex cabinet with 17 cm long HP50 reflex tube from 66/53 Hz (-3dB/-8dB).	TI100 order no. V-1271 EUR 142,00 11 cm bass driver with high quality cone power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 62 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 4,8 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 54 cm2 effective mechanical mass incl. air load 4 g equivalent volume of compliance Vas = 6,92 l total Q factor Qts = 0,38 (Qms=7,05, Qes=0,4) maximum peak linear excursion vibration x_lin = +/- 2,3 mm mounting diameter d = 100 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 72 mm
recommended cabinet 1: closed cabinet with 4 L volume from 119/75 Hz (-3dB/-8dB) recommended cabinet 2: 16 L volume bass reflex cabinet with 5 cm long HP50 reflex tube from 53/46 Hz (-3dB/-8dB).	TI100M order no. V-1273 - not available 11 cm midrange driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 84 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6 Ohm force factor BL = 4 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 54 cm2 effective mechanical mass incl. air load 3 g equivalent volume of compliance Vas = 4,9 l total Q factor Qts = 0,56 (Qms=6,33, Qes=0,61) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 100 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 72 mm
recommended cabinet 1: closed cabinet with 1,7 L volume from 125/79 Hz (-3dB/-8dB) recommended cabinet 2: 6,8 L volume bass reflex cabinet with 16 cm long HP50 reflex tube from 61/50 Hz (-3dB/-8dB).	W100S order no. V-9020 EUR 24,35 11 cm bass driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 67 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 53 cm2 effective mechanical mass incl. air load 4,3 g equivalent volume of compliance Vas = 5,2 l total Q factor Qts = 0,43 (Qms=1,97, Qes=0,55) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 94 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 48 mm
recommended cabinet 1: closed cabinet with 1,8 L volume from 123/77 Hz (-3dB/-8dB) recommended cabinet 2: 7,3 L volume bass reflex cabinet with 15 cm long HP50 reflex tube from 59/48 Hz (-3dB/-8dB).	W100S-8 order no. V-9021 EUR 25,90 11 cm bass driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 67 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 53 cm2 effective mechanical mass incl. air load 3,8 g equivalent volume of compliance Vas = 5,2 l total Q factor Qts = 0,43 (Qms=1,97, Qes=0,55) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 94 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 48 mm
recommended cabinet 1: closed cabinet with 1,7 L volume from 125/79 Hz (-3dB/-8dB) recommended cabinet 2: 6,8 L volume bass reflex cabinet with 16 cm long HP50 reflex tube from 61/50 Hz (-3dB/-8dB).	W100SC order no. V-9120 - not available 11 cm bass driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 67 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 53 cm2 effective mechanical mass incl. air load 5,4 g equivalent volume of compliance Vas = 5,2 l total Q factor Qts = 0,43 (Qms=1,97, Qes=0,55) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 94 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 61 mm
recommended cabinet 1: closed cabinet with 1,8 L volume from 123/77 Hz (-3dB/-8dB) recommended cabinet 2: 7,3 L volume bass reflex cabinet with 15 cm long HP50 reflex tube from 59/48 Hz (-3dB/-8dB).	W100SC-8 order no. V-9121 - not available 11 cm bass driver with high quality cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 67 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 3,4 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 53 cm2 effective mechanical mass incl. air load 3,8 g equivalent volume of compliance Vas = 5,2 l total Q factor Qts = 0,43 (Qms=1,97, Qes=0,55) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 94 mm overall diameter d = 122 mm mounting depth (not countersunk) t = 61 mm
recommended cabinet 1: closed cabinet with 1,8 L volume from 124/78 Hz (-3dB/-8dB) recommended cabinet 2: 6,9 L volume bass reflex cabinet with 16 cm long HP50 reflex tube from 55/48 Hz (-3dB/-8dB).	FR10 order no. V-2020 EUR 12,00 12 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 90 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 3,72 N/A voice coil inductance L = 0,35 mH effective piston radiating area Sd = 50 cm2 effective mechanical mass incl. air load 5,5 g equivalent volume of compliance Vas = 1,9 l total Q factor Qts = 0,57 (Qms=2,13, Qes=0,77) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 105 mm overall diameter d = 127,5 mm mounting depth (not countersunk) t = 44 mm
recommended cabinet 1: closed cabinet with 1,6 L volume from 128/81 Hz (-3dB/-8dB) recommended cabinet 2: 6,2 L volume bass reflex cabinet with 16 cm long HP50 reflex tube from 57/50 Hz (-3dB/-8dB).	FR10-8 order no. V-2021 EUR 10,80 12 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 90 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm force factor BL = 3,72 N/A voice coil inductance L = 0,35 mH effective piston radiating area Sd = 50 cm2 effective mechanical mass incl. air load 5,7 g equivalent volume of compliance Vas = 1,9 l total Q factor Qts = 0,57 (Qms=2,13, Qes=0,77) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 105 mm overall diameter d = 127,5 mm mounting depth (not countersunk) t = 44 mm
	SC13 order no. V-8013 EUR 24,25 12 cm midrange driver with high quality conet power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 75 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 7 Ohm force factor BL = 4,2 N/A voice coil inductance L = 0,66 mH effective piston radiating area Sd = 79 cm2 effective mechanical mass incl. air load 4,8 g equivalent volume of compliance Vas = 8 l total Q factor Qts = 0,73 (Qms=3,73, Qes=0,9) maximum peak linear excursion vibration x_lin = +/- 0,75 mm mounting diameter d = 113 mm overall diameter d = 131 mm mounting depth (not countersunk) t = 61 mm
	WS13E order no. V-1053 EUR 16,10 12 cm midrange driver with paper conet power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 83 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 7,7 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 86,5 cm2 effective mechanical mass incl. air load 5,1 g equivalent volume of compliance Vas = 7,7 l total Q factor Qts = 1,08 (Qms=3,52, Qes=1,56) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 113 mm overall diameter d = 131 mm mounting depth (not countersunk) t = 51 mm
	FR10WP order no. V-2110 EUR 15,60 12 cm full range driver with high quality cone power handling (continuous/programme) = 20 / 30 W resonance frequency fs = 120 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm voice coil inductance L = 0,3 mH effective piston radiating area Sd = 50 cm2 total Q factor Qts = 1,27 (Qms=3,13, Qes=2,14) mounting diameter d = 100 mm overall diameter d = 132 mm mounting depth (not countersunk) t = 41 mm
	MR130 order no. V-9016 EUR 19,70 12 cm midrange driver with high quality cone power handling (continuous/programme) = 80 / 100 W resonance frequency fs = 500 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 6,8 Ohm force factor BL = 4,3 N/A voice coil inductance L = 0,42 mH effective piston radiating area Sd = 70 cm2 effective mechanical mass incl. air load 5 g equivalent volume of compliance Vas = 0,14 l total Q factor Qts = 3,49 (Qms=8,67, Qes=5,85) mounting diameter d = 110 mm overall diameter d = 136 mm mounting depth (not countersunk) t = 39 mm
recommended cabinet 1: closed cabinet with 3,9 L volume from 104/65 Hz (-3dB/-8dB) recommended cabinet 2: 13,9 L volume bass reflex cabinet with 11 cm long HP50 reflex tube from 52/42 Hz (-3dB/-8dB).	W130S order no. V-9022 EUR 25,55 13 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 49 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 79 cm2 effective mechanical mass incl. air load 5,4 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,37 (Qms=2,58, Qes=0,43) maximum peak linear excursion vibration x_lin = +/- 2,3 mm mounting diameter d = 108 mm overall diameter d = 146 mm mounting depth (not countersunk) t = 54 mm
recommended cabinet 1: closed cabinet with 3,6 L volume from 106/67 Hz (-3dB/-8dB) recommended cabinet 2: 12,8 L volume bass reflex cabinet with 11 cm long HP50 reflex tube from 54/43 Hz (-3dB/-8dB).	W130S-8 order no. V-9023 EUR 27,90 13 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 49 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 79 cm2 effective mechanical mass incl. air load 6,2 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,37 (Qms=2,58, Qes=0,43) maximum peak linear excursion vibration x_lin = +/- 2,3 mm mounting diameter d = 108 mm overall diameter d = 146 mm mounting depth (not countersunk) t = 54 mm
recommended cabinet 1: closed cabinet with 3,9 L volume from 104/65 Hz (-3dB/-8dB) recommended cabinet 2: 13,9 L volume bass reflex cabinet with 11 cm long HP50 reflex tube from 52/42 Hz (-3dB/-8dB).	W130SC order no. V-9122 - not available 13 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 49 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 79 cm2 effective mechanical mass incl. air load 7,3 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,37 (Qms=2,58, Qes=0,43) maximum peak linear excursion vibration x_lin = +/- 2,3 mm mounting diameter d = 108 mm overall diameter d = 146 mm mounting depth (not countersunk) t = 67 mm
recommended cabinet 1: closed cabinet with 3,6 L volume from 106/67 Hz (-3dB/-8dB) recommended cabinet 2: 12,8 L volume bass reflex cabinet with 11 cm long HP50 reflex tube from 54/43 Hz (-3dB/-8dB).	W130SC-8 order no. V-9123 - not available 13 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 49 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,6 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 79 cm2 effective mechanical mass incl. air load 5,5 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,37 (Qms=2,58, Qes=0,43) maximum peak linear excursion vibration x_lin = +/- 2,3 mm mounting diameter d = 108 mm overall diameter d = 146 mm mounting depth (not countersunk) t = 67 mm
	FR12 order no. V-2060 EUR 12,00 13 cm full range driver with high quality cone power handling (continuous/programme) = 15 / 40 W resonance frequency fs = 110 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 3,4 Ohm voice coil inductance L = 0,14 mH effective piston radiating area Sd = 87 cm2 total Q factor Qts = 1,87 (Qms=5,61, Qes=2,8) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 113 mm overall diameter d = 146,5 mm mounting depth (not countersunk) t = 28 mm
	FR13WP order no. V-2113 EUR 15,70 13 cm full range driver with high quality cone power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 100 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm force factor BL = 2,3 N/A voice coil inductance L = 0,41 mH effective piston radiating area Sd = 78 cm2 effective mechanical mass incl. air load 4,8 g equivalent volume of compliance Vas = 4,4 l total Q factor Qts = 1,17 (Qms=2,49, Qes=2,19) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 110 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 41 mm
recommended cabinet 1: closed cabinet with 3,5 L volume from 87/55 Hz (-3dB/-8dB) recommended cabinet 2: 12,4 L volume bass reflex cabinet with 38 cm long HP70 reflex tube from 44/35 Hz (-3dB/-8dB).	AL130 order no. V-1301 EUR 89,00 14 cm bass driver with high quality cone power handling (continuous/programme) = 60 / 90 W resonance frequency fs = 40 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 5,64 N/A voice coil inductance L = 0,85 mH effective piston radiating area Sd = 78,5 cm2 effective mechanical mass incl. air load 8,8 g equivalent volume of compliance Vas = 15,6 l total Q factor Qts = 0,36 (Qms=5,19, Qes=0,39) maximum peak linear excursion vibration x_lin = +/- 6 mm mounting diameter d = 114 mm overall diameter d = 153 mm mounting depth (not countersunk) t = 58 mm
recommended cabinet 1: closed cabinet with 2,8 L volume from 106/67 Hz (-3dB/-8dB) recommended cabinet 2: 10,1 L volume bass reflex cabinet with 31 cm long HP70 reflex tube from 53/43 Hz (-3dB/-8dB).	Al130M order no. V-1305 EUR 89,00 14 cm midrange driver with high quality cone power handling (continuous/programme) = 150 / 200 W resonance frequency fs = 50 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 5,4 Ohm force factor BL = 5,58 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 78,5 cm2 effective mechanical mass incl. air load 7,6 g equivalent volume of compliance Vas = 11,6 l total Q factor Qts = 0,38 (Qms=5,38, Qes=0,41) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 114 mm overall diameter d = 153 mm mounting depth (not countersunk) t = 58 mm
	BG17 order no. V-3017 EUR 16,80 15 cm full range driver with high quality cone power handling (continuous/programme) = 40/ 60 W resonance frequency fs = 110 Hz impedance R = 8 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 5,7 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 143 cm2 effective mechanical mass incl. air load 6,5 g equivalent volume of compliance Vas = 9,7 l total Q factor Qts = 0,64 (Qms=2,87, Qes=0,83) maximum peak linear excursion vibration x_lin = +/- 1,5 mm mounting diameter d = 145 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 57 mm
	W170-8 order no. V-9063 EUR 16,80 15 cm bass driver with high quality cone power handling (continuous/programme) = 40 / 70 W resonance frequency fs = 68 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,72 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 137 cm2 effective mechanical mass incl. air load 8,1 g equivalent volume of compliance Vas = 17,3 l total Q factor Qts = 0,76 (Qms=3,84, Qes=0,95) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 143 mm overall diameter d = 165 mm mounting depth (not countersunk) t = 61 mm
	FR6.5" order no. V-31065 EUR 15,80 16 cm full range driver with high quality cone power handling (continuous/programme) = 40 / 60 W resonance frequency fs = 75 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 6,8 Ohm force factor BL = 2,48 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 5,9 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 1,96 (Qms=4,94, Qes=3,26) mounting diameter d = 143 mm overall diameter d = 171 mm mounting depth (not countersunk) t = 50 mm
recommended cabinet 1: closed cabinet with 5,7 L volume from 92/58 Hz (-3dB/-8dB) recommended cabinet 2: 18 L volume bass reflex cabinet with 22 cm long HP70 reflex tube from 49/38 Hz (-3dB/-8dB).	AL170 order no. V-1302 EUR 99,00 16 cm midrange driver with high quality conet power handling (continuous/programme) = 70 / 100 W resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 6,93 N/A voice coil inductance L = 0,91 mH effective piston radiating area Sd = 133 cm2 effective mechanical mass incl. air load 13 g equivalent volume of compliance Vas = 33 l total Q factor Qts = 0,33 (Qms=4,47, Qes=0,36) maximum peak linear excursion vibration x_lin = +/- 6 mm mounting diameter d = 148 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 63 mm
	FR16WP order no. V-2116 EUR 19,30 16 cm full range driver with high quality cone power handling (continuous/programme) = 60 / 80 W resonance frequency fs = 85 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 3,2 N/A voice coil inductance L = 0,36 mH effective piston radiating area Sd = 130 cm2 effective mechanical mass incl. air load 8,4 g equivalent volume of compliance Vas = 10 l total Q factor Qts = 1,02 (Qms=2,99, Qes=1,55) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 141 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 50 mm
recommended cabinet 1: closed cabinet with 12,7 L volume from 67/43 Hz (-3dB/-8dB) recommended cabinet 2: 49 L volume bass reflex cabinet with 13 cm long HP70 reflex tube from 33/27 Hz (-3dB/-8dB).	W170S order no. V-9024 EUR 32,45 17 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 36 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,4 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 12 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,41 (Qms=2,16, Qes=0,51) maximum peak linear excursion vibration x_lin = +/- 4,25 mm mounting diameter d = 147 mm overall diameter d = 187 mm mounting depth (not countersunk) t = 74 mm
recommended cabinet 1: closed cabinet with 11,9 L volume from 69/44 Hz (-3dB/-8dB) recommended cabinet 2: 46 L volume bass reflex cabinet with 14 cm long HP70 reflex tube from 34/27 Hz (-3dB/-8dB).	W170S-8 order no. V-9025 EUR 32,45 17 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 36 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,4 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 13 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,41 (Qms=2,16, Qes=0,51) maximum peak linear excursion vibration x_lin = +/- 4,3 mm mounting diameter d = 147 mm overall diameter d = 187 mm mounting depth (not countersunk) t = 74 mm
recommended cabinet 1: closed cabinet with 12,7 L volume from 67/43 Hz (-3dB/-8dB) recommended cabinet 2: 49 L volume bass reflex cabinet with 13 cm long HP70 reflex tube from 33/27 Hz (-3dB/-8dB).	W170SC order no. V-9124 on request (_) 17 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 36 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,4 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 12 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,41 (Qms=2,16, Qes=0,51) maximum peak linear excursion vibration x_lin = +/- 4,3 mm mounting diameter d = 147 mm overall diameter d = 187 mm mounting depth (not countersunk) t = 85 mm
recommended cabinet 1: closed cabinet with 11,9 L volume from 69/44 Hz (-3dB/-8dB) recommended cabinet 2: 46 L volume bass reflex cabinet with 14 cm long HP70 reflex tube from 34/27 Hz (-3dB/-8dB).	W170SC-8 order no. V-9125 on request (_) 17 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 36 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 4,4 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 12 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,41 (Qms=2,16, Qes=0,51) maximum peak linear excursion vibration x_lin = +/- 4,3 mm mounting diameter d = 147 mm overall diameter d = 187 mm mounting depth (not countersunk) t = 85 mm
recommended cabinet 1: closed cabinet with 10,9 L volume from 73/46 Hz (-3dB/-8dB) recommended cabinet 2: 45 L volume bass reflex cabinet with 12 cm long HP70 reflex tube from 34/28 Hz (-3dB/-8dB).	WS17E order no. V-1054 EUR 20,75 17 cm bass driver with paper cone power handling (continuous/programme) = 60 / 90 W resonance frequency fs = 45 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 5 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 143 cm2 effective mechanical mass incl. air load 17 g equivalent volume of compliance Vas = 21 l total Q factor Qts = 0,48 (Qms=2,25, Qes=0,61) maximum peak linear excursion vibration x_lin = +/- 4,5 mm mounting diameter d = 150 mm overall diameter d = 188 mm mounting depth (not countersunk) t = 75 mm
recommended cabinet 1: closed cabinet with 9,6 L volume from 76/48 Hz (-3dB/-8dB) recommended cabinet 2: 39 L volume bass reflex cabinet with 13 cm long HP70 reflex tube from 35/30 Hz (-3dB/-8dB).	WS17E-8 order no. V-1055 EUR 23,00 17 cm bass driver with paper cone power handling (continuous/programme) = 60 / 90 W resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 5 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 143 cm2 effective mechanical mass incl. air load 15 g equivalent volume of compliance Vas = 21 l total Q factor Qts = 0,48 (Qms=2,25, Qes=0,61) maximum peak linear excursion vibration x_lin = +/- 4,5 mm mounting diameter d = 150 mm overall diameter d = 188 mm mounting depth (not countersunk) t = 75 mm
recommended cabinet 1: closed cabinet with 19 L volume from 90/57 Hz (-3dB/-8dB) recommended cabinet 2: 60 L volume bass reflex cabinet with 4 cm long HP70 reflex tube from 48/38 Hz (-3dB/-8dB).	BG20 order no. V-3020 EUR 28,55 19 cm full range driver with high quality cone power handling (continuous/programme) = 40 / 70 W resonance frequency fs = 36 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 6,4 Ohm force factor BL = 6,12 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 10 g equivalent volume of compliance Vas = 121 l total Q factor Qts = 0,32 (Qms=1,6, Qes=0,4) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 183 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 82 mm
	T200 order no. V-4720 no longer deliverable 19 cm bass driver with high quality cone power handling (continuous/programme) = 80 / 120 W resonance frequency fs = 43 Hz impedance R = 4 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 4,98 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 211 cm2 effective mechanical mass incl. air load 18 g equivalent volume of compliance Vas = 49 l total Q factor Qts = 0,58 (Qms=3,51, Qes=0,69) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 185 mm overall diameter d = 205 mm mounting depth (not countersunk) t = 84 mm
	W200 order no. V-9064 EUR 23,85 19 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 45 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 4 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 207 cm2 effective mechanical mass incl. air load 14 g equivalent volume of compliance Vas = 53 l total Q factor Qts = 0,63 (Qms=3,23, Qes=0,79) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 184 mm overall diameter d = 206 mm mounting depth (not countersunk) t = 79 mm
	W200-8 order no. V-9065 EUR 23,85 19 cm bass driver with high quality cone power handling (continuous/programme) = 50 / 80 W resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,3 Ohm force factor BL = 4 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 207 cm2 effective mechanical mass incl. air load 14 g equivalent volume of compliance Vas = 53 l total Q factor Qts = 0,63 (Qms=3,23, Qes=0,79) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 184 mm overall diameter d = 206 mm mounting depth (not countersunk) t = 79 mm
	B200 order no. V-1350 EUR 151,00 20 cm full range driver with high quality cone power handling (continuous/programme) = 40 / 70 W resonance frequency fs = 40 Hz impedance R = 6 Ohm sound pressure level SPL = 96 dB (2,83V; 1m) DC resistance Re = 5 Ohm force factor BL = 3,9 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 9,7 g equivalent volume of compliance Vas = 102 l total Q factor Qts = 0,76 (Qms=8,39, Qes=0,83) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 189 mm overall diameter d = 210 mm mounting depth (not countersunk) t = 86 mm
recommended cabinet 1: closed cabinet with 12,3 L volume from 80/50 Hz (-3dB/-8dB) recommended cabinet 2: 38 L volume bass reflex cabinet with 30 cm long HP100 reflex tube from 43/33 Hz (-3dB/-8dB).	AL200 order no. V-1281 EUR 139,00 21 cm bass driver with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 32 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 6,7 Ohm force factor BL = 8,82 N/A voice coil inductance L = 1,2 mH effective piston radiating area Sd = 216 cm2 effective mechanical mass incl. air load 21 g equivalent volume of compliance Vas = 77 l total Q factor Qts = 0,32 (Qms=3,92, Qes=0,35) maximum peak linear excursion vibration x_lin = +/- 7 mm mounting diameter d = 189 mm overall diameter d = 222 mm mounting depth (not countersunk) t = 90 mm
recommended cabinet 1: closed cabinet with 21 L volume from 65/41 Hz (-3dB/-8dB) recommended cabinet 2: 82 L volume bass reflex cabinet with 18 cm long HP100 reflex tube from 32/26 Hz (-3dB/-8dB).	AL200DV order no. V-1283 on request (_) 21 cm bass driver with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 34 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 5,95 N/A voice coil inductance L = 0,3 mH effective piston radiating area Sd = 216 cm2 effective mechanical mass incl. air load 21 g equivalent volume of compliance Vas = 68 l total Q factor Qts = 0,4 (Qms=4,19, Qes=0,44) maximum peak linear excursion vibration x_lin = +/- 7 mm mounting diameter d = 189 mm overall diameter d = 222 mm mounting depth (not countersunk) t = 90 mm
recommended cabinet 1: closed cabinet with 13,7 L volume from 68/43 Hz (-3dB/-8dB) recommended cabinet 2: 50 L volume bass reflex cabinet with 32 cm long HP100 reflex tube from 34/27 Hz (-3dB/-8dB).	GF200 order no. V-1330 EUR 114,00 21 cm bass driver with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 32 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 1,5 Ohm force factor BL = 4,6 N/A voice coil inductance L = 0,33 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 25 g equivalent volume of compliance Vas = 57 l total Q factor Qts = 0,38 (Qms=4,42, Qes=0,41) maximum peak linear excursion vibration x_lin = +/- 7 mm mounting diameter d = 189 mm overall diameter d = 222 mm mounting depth (not countersunk) t = 90 mm
recommended cabinet 1: closed cabinet with 16 L volume from 56/36 Hz (-3dB/-8dB) recommended cabinet 2: 60 L volume bass reflex cabinet with 40 cm long HP100 reflex tube from 28/22 Hz (-3dB/-8dB).	TIW200XS order no. V-1340 EUR 126,00 21 cm bass driver with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 28 Hz impedance R = 8 Ohm sound pressure level SPL = 84 dB (2,83V; 1m) DC resistance Re = 5,9 Ohm force factor BL = 9,1 N/A voice coil inductance L = 1,6 mH effective piston radiating area Sd = 206 cm2 effective mechanical mass incl. air load 33 g equivalent volume of compliance Vas = 58 l total Q factor Qts = 0,39 (Qms=8,78, Qes=0,41) maximum peak linear excursion vibration x_lin = +/- 11 mm mounting diameter d = 189 mm overall diameter d = 222 mm mounting depth (not countersunk) t = 108 mm
recommended cabinet 1: closed cabinet with 9,6 L volume from 77/49 Hz (-3dB/-8dB) recommended cabinet 2: 29 L volume bass reflex cabinet with 44 cm long HP100 reflex tube from 42/33 Hz (-3dB/-8dB).	W200S order no. V-9029 EUR 47,25 21 cm bass driver with high quality cone power handling (continuous/programme) = 75 / 115 W resonance frequency fs = 30 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 7,7 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 28 g equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,3 (Qms=3,47, Qes=0,33) maximum peak linear excursion vibration x_lin = +/- 3,5 mm mounting diameter d = 182 mm overall diameter d = 232 mm mounting depth (not countersunk) t = 88 mm
recommended cabinet 1: closed cabinet with 9 L volume from 80/50 Hz (-3dB/-8dB) recommended cabinet 2: 26 L volume bass reflex cabinet with 47 cm long HP100 reflex tube from 44/34 Hz (-3dB/-8dB).	W200S-8 order no. V-9030 EUR 49,90 21 cm bass driver with high quality cone power handling (continuous/programme) = 75 / 115 W resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 7,7 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 26 g equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,3 (Qms=3,47, Qes=0,33) maximum peak linear excursion vibration x_lin = +/- 3,5 mm mounting diameter d = 182 mm overall diameter d = 232 mm mounting depth (not countersunk) t = 88 mm
recommended cabinet 1: closed cabinet with 9,6 L volume from 77/49 Hz (-3dB/-8dB) recommended cabinet 2: 29 L volume bass reflex cabinet with 44 cm long HP100 reflex tube from 42/33 Hz (-3dB/-8dB).	W200SC order no. V-9129 on request (_) 21 cm bass driver with high quality cone power handling (continuous/programme) = 75 / 115 W resonance frequency fs = 30 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 7,7 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 27 g equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,3 (Qms=3,47, Qes=0,33) maximum peak linear excursion vibration x_lin = +/- 3,5 mm mounting diameter d = 182 mm overall diameter d = 232 mm mounting depth (not countersunk) t = 97 mm
recommended cabinet 1: closed cabinet with 9 L volume from 80/50 Hz (-3dB/-8dB) recommended cabinet 2: 26 L volume bass reflex cabinet with 47 cm long HP100 reflex tube from 44/34 Hz (-3dB/-8dB).	W200SC-8 order no. V-9130 on request (_) 21 cm bass driver with high quality cone power handling (continuous/programme) = 75 / 115 W resonance frequency fs = 30 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 7,7 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 214 cm2 effective mechanical mass incl. air load 27 g equivalent volume of compliance Vas = 65 l total Q factor Qts = 0,3 (Qms=3,47, Qes=0,33) maximum peak linear excursion vibration x_lin = +/- 3,5 mm mounting diameter d = 182 mm overall diameter d = 232 mm mounting depth (not countersunk) t = 97 mm
	WS20E order no. V-1057 EUR 25,15 21 cm bass driver with polypropylene cone power handling (continuous/programme) = 80 / 120 W resonance frequency fs = 49 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 4,47 N/A voice coil inductance L = 0,67 mH effective piston radiating area Sd = 240 cm2 effective mechanical mass incl. air load 23 g equivalent volume of compliance Vas = 36 l total Q factor Qts = 1 (Qms=4,48, Qes=1,28) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 185 mm overall diameter d = 236 mm mounting depth (not countersunk) t = 85 mm
	WS20E-8 order no. V-1056 EUR 25,15 21 cm bass driver with polypropylene cone power handling (continuous/programme) = 80 / 120 W resonance frequency fs = 49 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 4,47 N/A voice coil inductance L = 0,67 mH effective piston radiating area Sd = 240 cm2 effective mechanical mass incl. air load 21 g equivalent volume of compliance Vas = 36 l total Q factor Qts = 1 (Qms=4,48, Qes=1,28) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 185 mm overall diameter d = 236 mm mounting depth (not countersunk) t = 85 mm
	W250 order no. V-9067 EUR 39,55 24 cm bass driver with high quality cone power handling (continuous/programme) = 90 / 130 W resonance frequency fs = 37 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,8 Ohm force factor BL = 6,4 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 360 cm2 effective mechanical mass incl. air load 27 g equivalent volume of compliance Vas = 135 l total Q factor Qts = 0,78 (Qms=3,57, Qes=1) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 236 mm overall diameter d = 255 mm mounting depth (not countersunk) t = 102 mm
recommended cabinet 1: closed cabinet with 14 L volume from 71/45 Hz (-3dB/-8dB) recommended cabinet 2: 40 L volume bass reflex cabinet with 37 cm long HP100 reflex tube from 40/31 Hz (-3dB/-8dB).	GF250 order no. V-1332 - not available 26 cm bass driver with high quality cone power handling (continuous/programme) = 150 / 200 W resonance frequency fs = 26 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 1,6 Ohm force factor BL = 6,5 N/A voice coil inductance L = 0,4 mH effective piston radiating area Sd = 346 cm2 effective mechanical mass incl. air load 54 g equivalent volume of compliance Vas = 110 l total Q factor Qts = 0,29 (Qms=4,23, Qes=0,31) maximum peak linear excursion vibration x_lin = +/- 6 mm mounting diameter d = 234 mm overall diameter d = 276 mm mounting depth (not countersunk) t = 110 mm
recommended cabinet 1: closed cabinet with 21 L volume from 80/50 Hz (-3dB/-8dB) recommended cabinet 2: 63 L volume bass reflex cabinet with 15 cm long HP100 reflex tube from 44/34 Hz (-3dB/-8dB).	W250S order no. V-9034 EUR 68,90 26 cm bass driver with high quality cone power handling (continuous/programme) = 100 / 150 W resonance frequency fs = 31 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 8,94 N/A voice coil inductance L = 0,93 mH effective piston radiating area Sd = 346 cm2 effective mechanical mass incl. air load 32 g equivalent volume of compliance Vas = 140 l total Q factor Qts = 0,3 (Qms=2,24, Qes=0,35) maximum peak linear excursion vibration x_lin = +/- 5 mm mounting diameter d = 231 mm overall diameter d = 283 mm mounting depth (not countersunk) t = 112 mm
recommended cabinet 1: closed cabinet with 38 L volume from 62/39 Hz (-3dB/-8dB) recommended cabinet 2: 144 L volume bass reflex cabinet with 9 cm long HP100 reflex tube from 31/25 Hz (-3dB/-8dB).	W250S-8 order no. V-9035 EUR 68,90 26 cm bass driver with high quality cone power handling (continuous/programme) = 100 / 150 W resonance frequency fs = 31 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 9,2 N/A voice coil inductance L = 1,5 mH effective piston radiating area Sd = 346 cm2 effective mechanical mass incl. air load 32 g equivalent volume of compliance Vas = 140 l total Q factor Qts = 0,4 (Qms=2,2, Qes=0,49) maximum peak linear excursion vibration x_lin = +/- 5 mm mounting diameter d = 231 mm overall diameter d = 283 mm mounting depth (not countersunk) t = 112 mm
	WS25E order no. V-1060 - not available 26 cm bass driver with high quality cone power handling (continuous/programme) = 80 / 110 W resonance frequency fs = 41 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 4,26 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 330 cm2 effective mechanical mass incl. air load 30 g equivalent volume of compliance Vas = 85 l total Q factor Qts = 1,05 (Qms=3,2, Qes=1,57) maximum peak linear excursion vibration x_lin = +/- 5,5 mm mounting diameter d = 224 mm overall diameter d = 283 mm mounting depth (not countersunk) t = 106 mm
	WS25E-8 order no. V-1061 EUR 35,20 26 cm bass driver with high quality cone power handling (continuous/programme) = 80 / 110 W resonance frequency fs = 41 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 3,7 Ohm force factor BL = 4,26 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 330 cm2 effective mechanical mass incl. air load 30 g equivalent volume of compliance Vas = 85 l total Q factor Qts = 1,05 (Qms=3,2, Qes=1,57) maximum peak linear excursion vibration x_lin = +/- 5,5 mm mounting diameter d = 224 mm overall diameter d = 283 mm mounting depth (not countersunk) t = 106 mm
recommended cabinet 1: closed cabinet with 19 L volume from 71/45 Hz (-3dB/-8dB) recommended cabinet 2: 52 L volume bass reflex cabinet with 55 cm long 2x HP100 reflex tube from 40/31 Hz (-3dB/-8dB).	TIW300 order no. V-1364 EUR 289,00 31 cm bass driver with high quality cone power handling (continuous/programme) = 300 / 600 W resonance frequency fs = 25 Hz impedance R = 8 Ohm DC resistance Re = 5,6 Ohm force factor BL = 16,5 N/A voice coil inductance L = 1,7 mH effective piston radiating area Sd = 510 cm2 effective mechanical mass incl. air load 92 g equivalent volume of compliance Vas = 160 l total Q factor Qts = 0,28 (Qms=4,59, Qes=0,3) maximum peak linear excursion vibration x_lin = +/- 7,5 mm mounting diameter d = 287 mm overall diameter d = 329 mm mounting depth (not countersunk) t = 143 mm
recommended cabinet 1: closed cabinet with 82 L volume from 55/35 Hz (-3dB/-8dB) recommended cabinet 2: 330 L volume bass reflex cabinet with 7 cm long 2x HP100 reflex tube from 26/22 Hz (-3dB/-8dB).	W300 order no. V-9069 EUR 66,90 29 cm bass driver with high quality cone power handling (continuous/programme) = 120 / 180 W resonance frequency fs = 32 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm force factor BL = 8,3 N/A voice coil inductance L = 1,07 mH effective piston radiating area Sd = 490 cm2 effective mechanical mass incl. air load 43 g equivalent volume of compliance Vas = 190 l total Q factor Qts = 0,47 (Qms=2,77, Qes=0,56) maximum peak linear excursion vibration x_lin = +/- 5,25 mm mounting diameter d = 280 mm overall diameter d = 305 mm mounting depth (not countersunk) t = 120 mm
recommended cabinet 1: closed cabinet with 37 L volume from 63/39 Hz (-3dB/-8dB) recommended cabinet 2: 101 L volume bass reflex cabinet with 34 cm long 2x HP100 reflex tube from 36/27 Hz (-3dB/-8dB).	W300S-8 order no. V-9041 EUR 112,00 29 cm bass driver with high quality cone power handling (continuous/programme) = 150 / 200 W resonance frequency fs = 22 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 8,4 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 507 cm2 effective mechanical mass incl. air load 57 g equivalent volume of compliance Vas = 310 l total Q factor Qts = 0,29 (Qms=1,78, Qes=0,34) maximum peak linear excursion vibration x_lin = +/- 5,25 mm mounting diameter d = 280 mm overall diameter d = 305 mm mounting depth (not countersunk) t = 134 mm
recommended cabinet 1: closed cabinet with 40 L volume from 60/38 Hz (-3dB/-8dB) recommended cabinet 2: 113 L volume bass reflex cabinet with 32 cm long 2x HP100 reflex tube from 34/26 Hz (-3dB/-8dB).	W300S order no. V-9040 EUR 112,00 31 cm bass driver with high quality cone power handling (continuous/programme) = 150 / 200 W resonance frequency fs = 22 Hz impedance R = 4 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 8,4 N/A voice coil inductance L = 1,1 mH effective piston radiating area Sd = 507 cm2 effective mechanical mass incl. air load 62 g equivalent volume of compliance Vas = 310 l total Q factor Qts = 0,29 (Qms=1,78, Qes=0,34) maximum peak linear excursion vibration x_lin = +/- 5,25 mm mounting diameter d = 280 mm overall diameter d = 332 mm mounting depth (not countersunk) t = 134 mm
recommended cabinet 1: closed cabinet with 63 L volume from 51/32 Hz (-3dB/-8dB) recommended cabinet 2: 219 L volume bass reflex cabinet with 19 cm long 2x HP100 reflex tube from 26/21 Hz (-3dB/-8dB).	TIW400 order no. V-1326 on request (_) 36 cm bass driver with high quality cone power handling (continuous/programme) = 300 / 700 W resonance frequency fs = 23 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 17 N/A voice coil inductance L = 2,6 mH effective piston radiating area Sd = 755 cm2 effective mechanical mass incl. air load 120 g equivalent volume of compliance Vas = 300 l total Q factor Qts = 0,35 (Qms=5,97, Qes=0,37) maximum peak linear excursion vibration x_lin = +/- 7,5 mm mounting diameter d = 357 mm overall diameter d = 375 mm mounting depth (not countersunk) t = 130 mm
recommended cabinet 1: closed cabinet with 36 L volume from 101/64 Hz (-3dB/-8dB) recommended cabinet 2: 106 L volume bass reflex cabinet with 6 cm long 2x HP100 reflex tube from 56/43 Hz (-3dB/-8dB).	BGS40 order no. V-3040 EUR 147,00 38 cm bass driver with high quality cone power handling (continuous/programme) = 300 / 700 W resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 98 dB (2,83V; 1m) DC resistance Re = 6,5 Ohm force factor BL = 16,8 N/A voice coil inductance L = 1,55 mH effective piston radiating area Sd = 855 cm2 effective mechanical mass incl. air load 80 g equivalent volume of compliance Vas = 263 l total Q factor Qts = 0,31 (Qms=1,3, Qes=0,4) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 359 mm overall diameter d = 403 mm mounting depth (not countersunk) t = 147 mm
	SL713 order no. V-2050 EUR 11,50 full range driver with high quality cone power handling (continuous/programme) = 10 / 15 W resonance frequency fs = 200 Hz impedance R = 4 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 3,9 Ohm force factor BL = 1,89 N/A voice coil inductance L = 0,17 mH effective piston radiating area Sd = 50 cm2 effective mechanical mass incl. air load 1,7 g equivalent volume of compliance Vas = 1,88 l total Q factor Qts = 1,87 (Qms=8,39, Qes=2,4) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 66x118 mm overall diameter d = 130x75 mm mounting depth (not countersunk) t = 43 mm
	SC4.7ND order no. V-8047 EUR 5,99 full range driver with high quality cone power handling (continuous/programme) = 2 / 4 W resonance frequency fs = 420 Hz impedance R = 4 Ohm sound pressure level SPL = 81 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm voice coil inductance L = 0,2 mH total Q factor Qts = 2,64 (Qms=4,43, Qes=6,55) mounting diameter d = 35x65 mm overall diameter d = 71x41 mm mounting depth (not countersunk) t = 30 mm
	SC4.7ND-8 order no. V-8048 EUR 5,99 full range driver with high quality cone power handling (continuous/programme) = 2 / 4 W resonance frequency fs = 420 Hz impedance R = 8 Ohm sound pressure level SPL = 81 dB (2,83V; 1m) DC resistance Re = 7,5 Ohm voice coil inductance L = 0,3 mH total Q factor Qts = 3,07 (Qms=4,92, Qes=8,18) mounting diameter d = 35x65 mm overall diameter d = 71x41 mm mounting depth (not countersunk) t = 30 mm
	SC5.9 order no. V-8006 EUR 7,09 full range driver with high quality cone power handling (continuous/programme) = 10 / 15 W resonance frequency fs = 169 Hz impedance R = 8 Ohm sound pressure level SPL = 83 dB (2,83V; 1m) DC resistance Re = 7,3 Ohm force factor BL = 2,47 N/A voice coil inductance L = 0,52 mH effective piston radiating area Sd = 26,5 cm2 effective mechanical mass incl. air load 1,5 g equivalent volume of compliance Vas = 0,57 l total Q factor Qts = 1,34 (Qms=4,15, Qes=1,97) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 43x82 mm overall diameter d = 90,5x50,5 mm mounting depth (not countersunk) t = 41 mm
	DX13 order no. V-4613 EUR 50,90 25 / 14 mm tweeter with high quality cone power handling (continuous/programme) = 60 / 80 W resonance frequency fs = 90 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) mounting diameter d = 116 mm overall diameter d = 138 mm mounting depth (not countersunk) t = 49 mm
	SC5.9ND order no. V-8055 EUR 7,99 full range driver with high quality cone power handling (continuous/programme) = 3 / 4 W resonance frequency fs = 243 Hz impedance R = 4 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 3,8 Ohm force factor BL = 0,96 N/A voice coil inductance L = 0,2 mH effective piston radiating area Sd = 26,5 cm2 effective mechanical mass incl. air load 1,3 g equivalent volume of compliance Vas = 0,32 l total Q factor Qts = 4,29 (Qms=9,23, Qes=8,03) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 43x82 mm overall diameter d = 90,5x50,5 mm mounting depth (not countersunk) t = 29,5 mm
	SC5.9ND-8 order no. V-8056 EUR 7,99 full range driver with high quality cone power handling (continuous/programme) = 3 / 4 W resonance frequency fs = 245 Hz impedance R = 8 Ohm sound pressure level SPL = 82 dB (2,83V; 1m) DC resistance Re = 7,7 Ohm force factor BL = 1,18 N/A voice coil inductance L = 0,35 mH effective piston radiating area Sd = 26,5 cm2 effective mechanical mass incl. air load 1,2 g equivalent volume of compliance Vas = 0,35 l total Q factor Qts = 4,11 (Qms=6,98, Qes=10,02) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 43x82 mm overall diameter d = 90,5x50,5 mm mounting depth (not countersunk) t = 29,5 mm
	FR9.15 order no. V-2054 EUR 11,80 full range driver with high quality cone power handling (continuous/programme) = 15 / 30 W resonance frequency fs = 120 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm voice coil inductance L = 0,3 mH total Q factor Qts = 1,82 (Qms=8,9, Qes=2,29) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 146x87 mm overall diameter d = 95x155 mm mounting depth (not countersunk) t = 29 mm
	DX4x6P order no. V-4660 EUR 38,55 coax driver with polypropylene cone power handling (continuous/programme) = 30 / 50 W resonance frequency fs = 120 Hz impedance R = 4 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 88x144 mm overall diameter d = 97,5x153 mm mounting depth (not countersunk) t = 42 mm