Faital PRO Compression Drivers and Horns   Professional Series   Five Hundred Series   High Performance Series   Fe Series   discontinued  
10 inch woofer   15 inch woofer   18 inch woofer  

Faital

Since its inception in 1958 Faital has specialized in the design and manufacture of loudspeakers for a variety of industries.

.. Starting in the early 60’s with 40% of the total Italian market demand for loudspeakers, Faital steadily grew to become today one of Europe’s largest loudspeaker manufacturers.

.. All the while Faital also focused on improving and increasing its industrialization and technological capabilities.

.. Today Faital can count on 8 facilities worldwide and 18 automated production lines all equipped with custom quality check systems.

We are proud to be able to sell their products!

Faital PRO Compression Drivers and Horns   Professional Series   Five Hundred Series   High Performance Series   Fe Series   discontinued  

 

open a bigger photo

10HP1020       order no. fp-02503939       EUR 353,80
25 cm bass-midrange driver with paper cone. The magnet system is based on Neodymium technology. The speaker has terminals to be connected. The basket is made of die-cast. The spider is rear ventilated for better cooling.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 60 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 25,7 N/A
  • voice coil inductance L = 0,85 mH
  • effective piston radiating area Sd = 339 cm2
  • effective mechanical mass incl. air load mms = 72,5 g
  • equivalent volume of compliance Vas = 15,65 l
  • total Q factor Qts = 0,23 (Qms=6,01, Qes=0,22)
  • voice coil diameter = 100 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 261 mm
  • mounting depth (not countersunk) t = 141,3 mm
  • mass m = 5,2 kg
PDF data sheet
 

open a bigger photo

10HP1020       order no. fp-02503949       - not available
25 cm bass-midrange driver with paper cone. The magnet system is based on Neodymium technology. The speaker has soldering lugs / faston terminals. The basket is made of die-cast. The spider is rear ventilated for better cooling.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 60 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 25,7 N/A
  • voice coil inductance L = 0,85 mH
  • effective piston radiating area Sd = 339 cm2
  • effective mechanical mass incl. air load mms = 72,5 g
  • equivalent volume of compliance Vas = 15,65 l
  • total Q factor Qts = 0,23 (Qms=6,01, Qes=0,22)
  • voice coil diameter = 100 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 261 mm
  • mounting depth (not countersunk) t = 141,3 mm
  • mass m = 5,2 kg
PDF data sheet
 

open a bigger photo

12HP1020       order no. fp-03003940       EUR 387,10
30 cm bass-midrange driver with paper cone. The magnet system is based on Neodymium technology. The speaker has terminals to be connected. The basket is made of die-cast. The spider is rear ventilated for better cooling.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 55-3150 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,3 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 520 cm2
  • effective mechanical mass incl. air load mms = 86 g
  • equivalent volume of compliance Vas = 37,4 l
  • total Q factor Qts = 0,27 (Qms=8,24, Qes=0,28)
  • voice coil diameter = 100 mm
  • mounting diameter d = 284 mm
  • overall diameter d = 316 mm
  • mounting depth (not countersunk) t = 155,75 mm
  • mass m = 5,6 kg
PDF data sheet
 

open a bigger photo

12HP1020       order no. fp-03003949       on request (_)
30 cm bass-midrange driver with paper cone. The magnet system is based on Neodymium technology. The speaker has soldering lugs / faston terminals. The basket is made of die-cast. The spider is rear ventilated for better cooling.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 55-3150 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,3 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 520 cm2
  • effective mechanical mass incl. air load mms = 86 g
  • equivalent volume of compliance Vas = 37,4 l
  • total Q factor Qts = 0,27 (Qms=8,24, Qes=0,28)
  • voice coil diameter = 100 mm
  • mounting diameter d = 284 mm
  • overall diameter d = 316 mm
  • mounting depth (not countersunk) t = 155,75 mm
  • mass m = 5,6 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 11,8 L volume
from 118/74 Hz (-3dB/-8dB)
 
recommended cabinet 2:
31 L volume bass reflex cabinet
with 2x HP100 reflex tube, 30 cm long.
from 68/51 Hz (-3dB/-8dB).

15HP1020       order no. fp-03803941       EUR 415,40
38 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The basket is made of die-cast. The spider is rear ventilated for better cooling. The speaker has terminals to be connected.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 40-3150 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 756,2 cm2
  • effective mechanical mass incl. air load mms = 118 g
  • equivalent volume of compliance Vas = 108 l
  • total Q factor Qts = 0,27 (Qms=10,2, Qes=0,28)
  • voice coil diameter = 100 mm
  • mounting diameter d = 356 mm
  • overall diameter d = 393 mm
  • mounting depth (not countersunk) t = 181,3 mm
  • mass m = 5,9 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 11,8 L volume
from 118/74 Hz (-3dB/-8dB)
 
recommended cabinet 2:
31 L volume bass reflex cabinet
with 2x HP100 reflex tube, 30 cm long.
from 68/51 Hz (-3dB/-8dB).

15HP1020       order no. fp-03803951       - not available
38 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. The speaker has soldering lugs / faston terminals. The basket is made of die-cast.
  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 40-3150 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 756,2 cm2
  • effective mechanical mass incl. air load mms = 118 g
  • equivalent volume of compliance Vas = 108 l
  • total Q factor Qts = 0,27 (Qms=10,2, Qes=0,28)
  • voice coil diameter = 100 mm
  • mounting diameter d = 356 mm
  • overall diameter d = 393 mm
  • mounting depth (not countersunk) t = 181,3 mm
  • mass m = 5,9 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 12,9 L volume
from 93/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
38 L volume bass reflex cabinet
with HP100 reflex tube, 20 cm long.
from 51/39 Hz (-3dB/-8dB).

15XL1400       order no. fp-15LX1400       on request (_)
36 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 1400/2800 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 27 N/A
  • voice coil inductance L = 1,6 mH
  • effective piston radiating area Sd = 780 cm2
  • effective mechanical mass incl. air load mms = 190 g
  • equivalent volume of compliance Vas = 94 l
  • total Q factor Qts = 0,3 (Qms=8,8, Qes=0,31)
  • voice coil diameter = 100 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 374 mm
  • mounting depth (not countersunk) t = 217 mm
  • mass m = 11,2 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 99/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
71 L volume bass reflex cabinet
with 2x HP100 reflex tube, 15 cm long.
from 57/43 Hz (-3dB/-8dB).

18HP1020       order no. fp-04603928       EUR 499,50
44 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. The speaker has terminals to be connected. The basket is made of die-cast.
  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 35-1600 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 27,2 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 1166 cm2
  • effective mechanical mass incl. air load mms = 182 g
  • equivalent volume of compliance Vas = 219,2 l
  • total Q factor Qts = 0,28 (Qms=9,74, Qes=0,29)
  • voice coil diameter = 100 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 202 mm
  • mass m = 6,1 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 99/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
71 L volume bass reflex cabinet
with 2x HP100 reflex tube, 15 cm long.
from 57/43 Hz (-3dB/-8dB).

18HP1020       order no. fp-04603929       - not available
44 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. The speaker has soldering lugs / faston terminals. The basket is made of die-cast.
  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 35-1600 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 27,2 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 1166 cm2
  • effective mechanical mass incl. air load mms = 182 g
  • equivalent volume of compliance Vas = 219,2 l
  • total Q factor Qts = 0,28 (Qms=9,74, Qes=0,29)
  • voice coil diameter = 100 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 202 mm
  • mass m = 6,1 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 38 L volume
from 89/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
127 L volume bass reflex cabinet
with 4x HP100 reflex tube, 24 cm long.
from 47/37 Hz (-3dB/-8dB).

18HP1040       order no. fp-04603946       EUR 516,20
44 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. The speaker has terminals to be connected. The basket is made of die-cast.
  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 38-2500 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,5 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 1166 cm2
  • effective mechanical mass incl. air load mms = 163 g
  • equivalent volume of compliance Vas = 208,8 l
  • total Q factor Qts = 0,34 (Qms=8,75, Qes=0,35)
  • voice coil diameter = 100 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 202 mm
  • mass m = 6,1 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 38 L volume
from 89/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
127 L volume bass reflex cabinet
with 4x HP100 reflex tube, 24 cm long.
from 47/37 Hz (-3dB/-8dB).

18HP1040       order no. fp-04603947       - not available
44 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The spider is rear ventilated for better cooling. The speaker has soldering lugs / faston terminals. The basket is made of die-cast.
  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 38-2500 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 24,5 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 1166 cm2
  • effective mechanical mass incl. air load mms = 163 g
  • equivalent volume of compliance Vas = 208,8 l
  • total Q factor Qts = 0,34 (Qms=8,75, Qes=0,35)
  • voice coil diameter = 100 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 202 mm
  • mass m = 6,1 kg
PDF data sheet
 

open a bigger photo

recommended cabinet 1:
closed cabinet with 33 L volume
from 77/49 Hz (-3dB/-8dB)
 
recommended cabinet 2:
102 L volume bass reflex cabinet
with 2x HP100 reflex tube, 18 cm long.
from 42/32 Hz (-3dB/-8dB).

18XL1500       order no. fp-04603971       EUR 499,00
44 cm bass driver with paper cone. The magnet system is based on Neodymium technology. The voice coil is ventilated. The basket is made of die-cast.
  • power handling (continuous/programme) = 1500/3000 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 31 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 28,1 N/A
  • voice coil inductance L = 1,45 mH
  • effective piston radiating area Sd = 1174 cm2
  • effective mechanical mass incl. air load mms = 213 g
  • equivalent volume of compliance Vas = 205 l
  • total Q factor Qts = 0,31 (Qms=7,4, Qes=0,33)
  • voice coil diameter = 98 mm
  • mounting diameter d = 424 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 231 mm
  • mass m = 10,5 kg
PDF data sheet
 
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2010 Iris Strassacker; All rights reserved. - errors and omissions excepted